Mass Range
|
m/z 10 “ 1350
|
Mass Accuracy
|
± 0.13 u within the calibrated mass range in scan mode
|
Mass Axis Stability
|
The mass drift does not exceed the larger absolute value of ± 0.1 Da or ± 100 ppm of measured mass over a 12 hour period at constant temperature ± 3 degrees centrigrade.
|
Scan Speed
|
10,000 u/s in fast mode and 2500 u/s in normal mode
|
SIM Sensitivity
|
ESI at 400 μ/min or APCI at 1000 μ/min Selected ion monitoring of m/z 609.3 Positive ionization 1 pg reserpine, 100:1 RMS (20:1 peak-to-peak)
|
Scan Sensitivity
|
ESI at 400 μ/min or APCI at 1000 μ/min Scan range m/z 100 “ 650 Scan speed 2500 u/s Extracted ion at m/z 609.3 Positive ionization 50 pg reserpine, 100:1 RMS (20:1 peak-to-peak)
|
Flow Rate
|
ESI: Up to 1.0 ml/min water without a flow splitter APCI: Up to 1.5 ml/min water without a flow splitter
|
Multisignal acquisition
|
Ability to cycle through four acquisition modes on a scan-by-scan basis within a single run. Up to four analysis modes can be viewed in the software window and can be linked together to facilitate processing and analysis. Modes of operation: positive/negative polarity switching, variable fragmentor voltage selection, and concurrent SIM/scan.
|
Operating Conditions
|
Temperature range: 15 °C to 35 °C (59 °F to 95 °F) Relative humidity: less than 95 % (non-condensing)
|
Dimensions
|
Height: 65 cm (26 in) Width: 39 cm (15 in) Depth: 75 cm (29 in) Weight: 50 kg (110 pounds)
|
Electrical Requirements
|
200-240V, 50/60Hz
|