Home > Electrophoresis Power Supplies
Sort By:
Page of 3
BioRad PowerPac HC High-Current Power Supply BioRad PowerPac HC High-Current Power Supply

BioRad PowerPac HC Power Supply Specifications

Output (programmable)

Voltage 5 250 V

Current 0.01 – 3.0 A

Power 1 – 300 W

Type of output

Constant voltage, current, or power with automatic crossover

Timer control

1 min – 99 hr 59 min, fully adjustable

Display functions

2-line, 16-character backlit LCD

EMI

Conforms to CE standards for emisions and immunity class A, tested only at 230 V, TUV EMC certification

Input Protection

Fuse on hot and neutral

Safety features

No-load detection, rapid resistance change detection, ground leak detection, overload/short circuit detection, overvoltage protection, overtemperature protection

Dimensions (W x L x H)

25 x 28.5 x 8 cm (9.8 x 11.2 x 3.1 in)

Our Price: $795.00
EC-105 Electrophoresis Power Supply EC-105 Electrophoresis Power Supply

EC-105 Electrophoresis Power Supply


The EC Apparatus Electrophoresis Power Supply EC-105. Specifications: Maximum Voltage 250V, Voltage Steps Low Range Setting: 20-130V (Increments of 10V), Voltage Steps High Range Setting: 140-250V (Increments of 10V) Max. Current 300mA @ 150-250V; 500mA below 150V. Display Modes Voltage or current. Electrical Requirements 120V/50Hz.

Our Price: $230.00
Biorad PowerPac Basic Electrophoresis Power Supply Biorad PowerPac Basic Electrophoresis Power Supply

Biorad PowerPac Basic Electrophoresis Power Supply Specifications

Output

Voltage

10 V to 300 V, fully adjustable in 1 V steps

Voltage Accuracy

+/- 2% of reading or 3 volts, whichever is more

Current

4 mA to 400 mA, fully adjustable in 1 mA steps

Current Accuracy

+/- 2% of reading or 3 mA, whichever is more

Power (maximum)

75 Watts

Terminals

4-pair recessed banana jacks, floating in parallel

Timer Control

001 to 999 minutes, fully adjustable

Ripple

<1% @ 300 V and 70 W

Line Regulation

<1% @ 300 V and 70 W, 90-132 or 198-264 VAC

Load Regulation

<1% @ 300 V for a 50% change in output load

Drift

<1% @ after 15 min warmup at 300 V and 70 W

Noise

55 dBA at 1 meter

Our Price: $445.00
Biorad PowerPac 3000 Electrophoresis Power Supply Biorad PowerPac 3000 Electrophoresis Power Supply

Biorad PowerPac 3000 Electrophoresis Power Supply Specifications

Biorad PowerPac 3000 Power Supply

Max Voltage: 3000V

Max Current: 400mA

Max Wattage: 400W

Our Price: $445.00
Novex Power Ease 500 Electrophoresis Power Supply Novex Power Ease 500 Electrophoresis Power Supply

Invitrogen Novex Power Ease 500 Electrophoresis Power Supply Specifications

Input power

100/120 VAC

90-132V, 50/60 Hz, 100 watts at maximum load

Fuse

One 1A/250V/AGC, fast blow fuse

220/240 VAC

198-264VAC, 50/60 Hz, 260 mA at maximum load

Fuses

Two F1A/250V/5x20 mm fast blow fuses


Accuracy

Voltage: ± 2% or ± 2 volts

Current: ± 2% or ± 2 mA

Wattage ± 2% or ± 0.2 watt

Drift

< 1% in 8 hours after 30 minute warm-up with constant supply voltage

Circuit Protection

Open Circuit; Short Circuit; Thermal Protection Over Voltage, Current, Wattage

Safety

Load Detection

Thermal Shutoff (with optional temperature probe)

Isolated Floating Ground

Display

LCD


Our Price: $395.00
VWR 105 EC Electrophoresis Power Supply VWR 105 EC Electrophoresis Power Supply

VWR 105 EC Electrophoresis Power Supply


The VWR 105 EC Electrophoresis Power Supply. Specifications: Maximum Voltage 250V, Voltage Steps Low Range Setting: 20-130V (Increments of 10V), Voltage Steps High Range Setting: 140-250V (Increments of 10V) Max. Current 300mA @ 150-250V; 500mA below 150V. Display Modes Voltage or current. Electrical Requirements 120V/50Hz.

Our Price: $235.00
Thermo Scientific Owl EC-105 Compact Eletrophoresis Power Supply System Thermo Scientific Owl EC-105 Compact Eletrophoresis Power Supply System

Thermo Scientific Owl EC-105 Compact Eletrophoresis Power Supply System


The Thermo Owl EC-105 Compact Power Supply operates as a constant voltage power supply and is very simple to use. The adjustment knob and hi-lo range switch control the output, which is variable in 10V increments from 20V to 250V. One, two-position switch toggles the bright LED display from indicating output voltage to output current. The supply is also equipped with an over current detector for maximum safety and has two jacks. Overcurrent protection is provided by audible and visual alarms and a single 1A slo-blow fuse on the main circuit. Ideal for use with DNA/RNA electrophoresis. Output Jacks: 2. Adjustable Voltage: 20 To 250 In 10V Steps. Adjustable Current: 0.01 To 2.00A In 0.01A Steps. Maximum Voltage: 250V. Maximum Current: 2A. Maximum Power: 200W.

Our Price: $225.00
   
 
Electrophoresis Power Supplies