 |
 |
 |
|
Amersham Pharmacia Biotech AKTA Prime FPLC System
The Amersham Pharmacia Biotech AKTA Prime is a compact, single-step FPLC system designed for simple purification of proteins. This FPLC system offers an easy-to-use interface with pre-programmed templates, contributing to its high reproducibility and accuracy. The AKTA Prime also features many error-reduction capabilities, such as automatic UV detection and temperature compensation and motorized valves that ensure automatic buffer or sample selection, sample loading, and fraction collection. Fractions and peaks are easily detected via slope sensing within fixed volume collection or automatic peak fractionation. The AKTA Prime is fully compatible with most compact columns, including HiTrap, Hiprep, HiLoad, and RESOURSE, among others.
The Amersham Pharmacia Biotech AKTA Prime FPLC System is engineered for high quality gel filtration, HIC, affinity chromatography, buffer exchange, and ion exchange. PH Electrode Not Included.
The Amersham Pharmacia Biotech AKTA Prime FPLC System includes:
- > HP Laptop with PrimeView Software
- > Conductivity Flow Cell
- > Built in Fraction Collector
- > Power Cords and Cables
- > Installation Calibration Report
- > Operator's Guide
- > Full 180 Day Parts and Labor Warranty
Amersham Pharmacia Biotech AKTA Prime FPLC System Specifications
|
Flow Rate
|
0.1ml per minute up to 50ml per minute
|
|
Maximum Operating Pressure (MPa)
|
1 MPa or 145 psi
|
|
Wavelength Detection
|
254nm and 280nm
Additional filters can be purchased and include
313, 365, 405, 436 and 546nm
|
|
Flow Cell Path Length
|
0-14
|
|
Sample Injection
|
Up to 2 steps
|
|
pH Monitoring
|
Up to 2 samples, this is add-on option
|
|
Viscosity
|
10 cp (10ml per minute)
|
|
Relative Humidity
|
20% to 95% non-condensing
|
|
Multi Step Purification
|
20% to 95% non-condensing
|
|
Tubing I.D.
|
0.75 mm for flow path
|
|
Power
|
100-120/220-240 VAC 50/60Hz
|
|
Dimensions (W x D x H)
|
18” x 14” x 21”
|
|
Weight
|
28 lbs.
|
|
|
Pharmacia AKTA Prime (This Model)
|
Amersham Biosciences AKTA Prime
|
GE AKTA Prime Plus
|
|
Generation
|
1
st Generation
|
2
nd Generation
|
3
rd Generation
|
|
Pressure Range
|
0–1.0 MPa (10 bar, 145 psi)
|
0–1.0 MPa (10 bar, 145 psi)
|
0–2.0 MPa (20 bar, 290 psi)
|
|
Flow Rate Accuracy
|
±3% or ±0.1 ml/min whichever is greater
|
±3% or ±0.1 ml/min whichever is greater
|
-5% – +3% of setting (pressure ≥ 0.1 MPa, flow rate ≥ 0.4 ml/min)
|
|
Absorbance Range
|
0.01–5.0 AU
|
0.01–5.0 AU
|
0.01–5.0 AU
|
|
Detector Linearity
|
< 3% up to 2 AU at 254 nm < 5% up to 1 AU at 280 nm
|
< 3% up to 2 AU at 254 nm < 5% up to 1 AU at 280 nm
|
< 3% up to 2 AU at 254 nm < 5% up to 1 AU at 280 nm
|
|
Static Noise
|
40x10-6 AU at 254 nm
|
40x10-6 AU at 254 nm
|
40x10-6 AU at 254 nm
|
|
Wavelengths
|
254nm and 280nm (optional filters include: 313, 365, 405, 436 and 546 nm)
|
254nm and 280nm (optional filters include: 313, 365, 405, 436 and 546 nm)
|
254nm and 280nm (optional filters include: 313, 365, 405, 436 and 546 nm)
|
Our technicians decontaminate and clean equipment upon arrival at our facility and upon your purchase to create a neutral environment for your labs use.
Preliminary testing is then conducted on our equipment to identify potential defects. Upon completion, we replace all faulty and/or under-performing parts with original manufacturer parts that perform up to specification.
Any parts known to fail or malfunction on the piece of equipment are removed and replaced to insure the extended lifetime of your equipment.
Any necessary preventative maintenance is performed alongside repairs, so your purchase will be ready to go as soon as it arrives.
All of the electronics and boards are tested for proper function and response by our industry trained technicians. Any electronic deficiencies detected are immediately repaired.
Final testing cycles ensure your equipment performs fully at manufacturer specifications, guaranteeing you receive a properly working product ready for use.
Once we finish our rigorous testing and decontamination procedures, your order will be packaged to best protect it during shipment and will include delivery insurance.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Every product we offer undergoes a rigorous inspection process to verify that all manufacturer specifications are met. All of the electronics and boards are tested for proper function, and any necessary preventative maintenance is performed alongside repairs by our industry trained technicians. Our primary goal is to offer products that are as close to new as possible at an affordable price.
All Lab Equipment is Fully Recertified and Tested
Most Pieces Ship within 2 to 5 Business Days
All Products Come with a Standard Warranty
Trained Customer and Technical Support
Industry Leading Overall Customer Satisfaction
We love shopping at Marshall Scientific! Great products, prices, and performance. Marshall Scientific provides 'tried and true' equipment at a fraction of original purchase price. I always shop here first!
Meg W. / Stanford University
Easy to find what you need with clear specs, website ordering was simple, equipment arrived quickly, very well packaged and working as expected! I couldn't ask for more, I'll definitely use them again!
A. Bradley / Honeywell
They do a very high quality job worth every penny they charge. Customer service is fantastic, they can always be reached by phone or email, and the staff are very knowledgeable and ready to help.
Igor P. / University of Maryland
Click Here to View Our Other Testimonials
|
|
|
|
|
|
|
