Holds
40 x 1.5 to 2mL microcentrifuge tube or 100 x 5mL to 6mL tube
For Use With
CentriVap™ DNA system
Material
Anodized Aluminum
Weight
3 lb.
Capacity
1.5 to 2mL
Total Count
40.0
44 x 12ml to 17ml tubes and 24 x 16ml to 17ml tubes
Labconco CentriVap™ Systems
4 lb.
12 to 17mL
40
Flow Rate
117L/min (4.1 cfm)
Horsepower
0.37hp
Dimensions (H x L x W)
10.375 x 17 x 6.5 in
Weight (without oil)
21.5 kg (47.5 lbs)
Oil Capacity
0.7 L
Recommended Oil
Ultragrade 19
Inlet Flange
NW25
Noise Level
48 dBA @ 50Hz
Operating Temperature
12° to 40°C
Electrical Requirements
115V, 50/60Hz
Displacement
6.9 cfm (195L/min)
Max vacuum
1.5 x 10^-3 torr
Inlet pressure for water vapor
29 torr
Max water vapor pumping rate
0.48 lb/h
Oil capacity Max/Min
0.75L/0.43L
48 dbA
115V, 60Hz
8
Max. Speed
1,725 RPM
Temperature Range
Up to 100°C
Time Range
1 to 999 minutes
Vacuum Level
0 to 999 mbar
Rotor Capacity
90 x 1.5/2.0 ml Tubes
115V, 60Hz, 17A
Vacuum Level (With External Pump)
< 7 mbar
0.5 ml
115V, 60Hz, 12A
-84C
Stainless Steel
Dimensions (W x D x H)
14.5 x 22 x 20.9 in (36.8 x 55.9 x 53.1 cm)
142 lbs (64 kg)
Electrical
115V 60Hz, 900W, 8A
Dimensions
20.4”w x 11.2”d x 13”h 51 x 28 x 33 cm
Pressure Range
0 to 3.1
35 lb. (15.9kg)
Epoxy coated Steel
Display
LCD
Run Time
1 to 999 min.
50.0
115V, 60Hz, 16A
115 V, 60 Hz, 16 amps. 20 amp circuit breaker is required
Inlet Water Temperature Min.
120°F (49C)
Inlet Water Temperature Max.
82C (180°F)
Inlet Water Temperature Recommended
60C (140°F)
24.2 x 27.5 x 34.2-36.1=2 in (61.5 cm x 69.9 cm x 86.9-91.9 cm)
Max. Pressure
20 to 120psi for hot tap water pressure at washer
Product Type
SteamScrubber™ Glassware Washer
Weight Shipping
206 lb (93kg)
4.7L/min. for hot tap water, 3.4L/min. for purified water
For Use With (Application)
Ideal for college and university, government, pharmaceutical and industrial labs or any facility utilizing reusable glassware
Up to 100°C w/ Heat Boost
0.002 mbar
132 x 12-13mm Tubes
115V, 60Hz, 10.5A
Max Speed
7 mbar
1.5/2.0 ml
