 |
 |
 |
 |
Biorad ChemiDoc XRS System w/ Universal Hood II
The Biorad ChemiDoc XRS System w/ Universal Hood II is based on CCD high-resolution, high-sensitivity detection technology and modular options to accommodate a wide range of samples and support multiple detection methods including fluorescence, colorimetry, densitometry, chemiluminescence, and chemifluorescence. The system is controlled by Quantity One to optimize imager performance for fast, integrated, and automated image capture and analysis of various samples. The ChemiDoc XRS System optimizes reproducibility and reliability of experimental data, enabling quantitative comparisons between different experiments. The Biorad ChemiDoc XRS System w/ Universal Hood II is fully tested to perform at factory
specifications before being shipped.
The Biorad ChemiDoc XRS Imaging System includes:
- > Windows 7 Dell Workstation with Quantity One Software, 4.6.9 Basic Version and Image Lab (6.01) Preinstalled
- > UV Camera
- > Flat Screen Monitor
- > Communication Card & Interface Cables
- > UV Filter
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
- > Please Note: The Biorad ChemiDoc XRS does not directly interface with Image Lab software. Users must use Quantity One software to capture an image of the gel and then import that image into Image Lab for analysis. If you are looking for a system that directly interfaces with Image Lab software please visit our ChemiDoc XRS+ product listing.
Biorad ChemiDoc XRS System w/ Universal Hood II Specifications
Applications
|
|
Chemiluminescence
|
Yes
|
Fluorescence
|
Yes
Note: Use the optional XcitaBlue kit if performing SYBR® Safe DNA
applications, because the UV to blue conversion screen allows you to
visualize DNA samples while protecting against UV damage.
|
Colorimetry/densitometry
|
Yes
|
Gel documentation
|
Yes
|
Hardware Specifications
|
|
Maximum sample size
|
28 x 36 cm
|
Maximum image area
|
25 x 26 cm
|
Excitation Source
|
Trans UV 302, 254,
365 nm & White,
Epi-White light
|
Illumination control
|
3 modes (trans-UV, trans white, epi-white)
|
Detector
|
Super Cooled CCD
|
CCD Resolution
|
1300 (H) x 1030 (V)
|
Pixel size (microns)
|
6.7 (H) x 6.7 (V)
|
Cooling System
|
Peltier Cooled, -45°C
|
Filter holder
|
3 positions (2 for filters, 1 without filter)
|
Emission filters
|
1 included (standard), 4 optional
|
Dynamic range
|
>3.0 orders of magnitude
|
Pixel density (gray levels)
|
4,096 (12 bit)
|
Dynamic flat fielding
|
Application specific, for all applications
|
Instrument size (L x W x H)
|
36 x 61 x 96 cm
|
Instrument weight
|
32 kg
|
Operating Ranges
|
|
Operating voltage
|
110/115/230 V AC nominal
|
Operating temperature
|
10–28°C (21°C recommended)
|
Operating humidity
|
<70% noncondensing
|
ChemiDoc XRS System Applications:
Chemiluminescence
|
Yes
|
Fluorescence
|
Yes
|
Chemifluorescence
|
No
|
Colormetric/Densitometry
|
Yes
|
Gel Documentation
|
Yes
|
Isotopic Imaging
|
No
|
Biorad ChemiDoc XRS System w/ Universal Hood II Operators Manual
Our technicians decontaminate and clean equipment upon arrival at our facility and upon your purchase to create a neutral environment for your labs use.
Preliminary testing is then conducted on our equipment to identify potential defects. Upon completion, we replace all faulty and/or under-performing parts with original manufacturer parts that perform up to specification.
Any parts known to fail or malfunction on the piece of equipment are removed and replaced to insure the extended lifetime of your equipment.
Any necessary preventative maintenance is performed alongside repairs, so your purchase will be ready to go as soon as it arrives.
All of the electronics and boards are tested for proper function and response by our industry trained technicians. Any electronic deficiencies detected are immediately repaired.
Final testing cycles ensure your equipment performs fully at manufacturer specifications, guaranteeing you receive a properly working product ready for use.
Once we finish our rigorous testing and decontamination procedures, your order will be packaged to best protect it during shipment and will include delivery insurance.
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Every product we offer undergoes a rigorous inspection process to verify that all manufacturer specifications are met. All of the electronics and boards are tested for proper function, and any necessary preventative maintenance is performed alongside repairs by our industry trained technicians. Our primary goal is to offer products that are as close to new as possible at an affordable price.
All Lab Equipment is Fully Recertified and Tested
Most Pieces Ship within 2 to 5 Business Days
All Products Come with a Standard Warranty
Trained Customer and Technical Support
Industry Leading Overall Customer Satisfaction
We love shopping at Marshall Scientific! Great products, prices, and performance. Marshall Scientific provides 'tried and true' equipment at a fraction of original purchase price. I always shop here first!
Meg W. / Stanford University
Easy to find what you need with clear specs, website ordering was simple, equipment arrived quickly, very well packaged and working as expected! I couldn't ask for more, I'll definitely use them again!
A. Bradley / Honeywell
They do a very high quality job worth every penny they charge. Customer service is fantastic, they can always be reached by phone or email, and the staff are very knowledgeable and ready to help.
Igor P. / University of Maryland
Click Here to View Our Other Testimonials
|
|
 |
 |
 |
 |

|