Peak Pumping Speed
4.1 cfm at 60 Hz
Ultimate Pressure
1.5x10-3 Torr (2x10-3mbar)
Max water vapor inlet pressure
38 torr (50 mbar)
Max water vapor capacity II
220 grams/hour
Weight
47 pounds
Dimensions
16.9 L x 6.2 W x 8.9 H in
Operating Temperature Range
12-40 Celsius
Oil Capacity
0.7 L
Oil Type
Ultragrade 19
Electrical Supply
1 Ph, 100-120/200-230 VAC, 50/60
2.3 cfm at 60 Hz
1.5x10-3 Torr (2x10-3 mbar)
60 torr (80 mbar)
220 grams/ hr
Noise Level
48 dB(A)
Operating temperature range
0.70 Liters
1 Ph, 100-120/200-230 VAC 50/60 Hz
10 cfm at 60 Hz
48 dBa
Connection
Inlet: NW25 Exhaust: NW25
Max Water Vapor Capacity II
290 grams/hr
58 Pounds
Dimensions (inches)
19.3 L x 6.2 W x 8.9 H
1.0 L
12 ‚ 40 Å C
Maximum Displacement
50 Hz Electrical Supply
32.2 m3 h-1
60 Hz Electrical Supply
38.9 m3 h-1
Maximum Speed Pneurop
50 Hz electrical supply
27.5 m^3 h^-1
60 Hz electrical supply
33.0 m^3 h^-1
Motor Rotational Speed
1440 r min^-1
1720 r min^-1
6 cfm at 60 Hz
38 Torr (50 mbar)
57 pounds
18.5 L x 6.2 W x 8.9 H in
0.75 L
Displacement 50 or 60Hz
43 m3h-1 / 25 ft3min-1
Peak pumping speed 50 or 60Hz
35 m3h-1 / 21 ft3min-1
Ultimate vacuum (Total pressure)
1 x 10-2 mbar / 8 x 10-3 Torr
Max inlet pressure for water vapour
35 mbar / 23 Torr
Max water vapour pumping rate ‚ GB I
70 gh-1
Max water vapour pumping rate ‚ GB II
240 gh-1
Max allowed outlet pressure
0.2 bar gauge / 2.9 psig*
Max allowed inlet and GB pressure
0.5 bar gauge / 7 psig
Motor power
0.52kW
Power connector
IEC EN60320 C19
Nominal rotation speed
1750 rpm
48 kg / 105 lb
Inlet flange
NW40
Exhaust flange
NW25
Noise level
57 dB (A)
Vibration
<4.5mms -1 (rms)
Leak tightness (static)
<1 x 10-6 mbar ls-1
10 to 40 °C / 50 to 104 °F
Electrical Requirements
115/230 V
Nominal rotational speed
1800 rpm
Displacement
6.2 m3h-1 / 3.6 ft 3min-1
Peak pumping speed
Ultimate vacuum (total pressure)
0.020 mbar / 0.015 Torr
Minimum standby rotational speed
1200 rpm
Speed control resolution (percentage of full rotation speed)
1%
Pumping speed at minimum rotational speed
4.1
Maximum continuous inlet pressure
200 mbar
Motor power 1-ph
260 W
Power connector 1-ph
IEC EN60320 C13
Recommended fuse
10A, 250Vac rms
26.2 kg / 58 lb
52 dB(A)
Vibration at inlet flange
< 4.5 mms-1 (rms)
< 1x10-6 mbar ls-1
10 to 40 ‚°C / 41 to 104 ‚°F
115/230V
12.7 m3h-1 / 7.5 ft3min-1
11.4 m3h-1 / 6.7 ft3min-1
0.007 mbar / 0.005 Torr
7.5
280 W
25.8 kg / 57 lb
28.0 m3h-1 / 16.5 ft3min-1
22.0 m3h-1 / 13.0 ft3min-1
0.030 mbar / 0.022 Torr
10
50 mbar
25.6 kg / 56 lb
