|
Maximum Scan Speed
|
10,400 Da/sec
|
|
SIM Sensitivity, ESI Positive
|
Signal-to-noise ratio > 250:1 (1 pg of reserpine injected on column,
quantifying the m/z 609 ion)
|
|
SIM Sensitivity, APCI Positive
|
Signal-to-noise ratio > 100:1 (1 pg of reserpine injected on column,
quantifying the m/z 609 ion)
|
|
Polarity Switching
|
30 msec (switching time from positive to negative polarity)
|
|
Mass Resolution (Autotune)
|
Unit resolution (full width at half maximum)
|
|
Mass Stability
|
< 0.1 amu or 100 ppm, whichever is larger (over 12 hours)
|
|
Mass Accuracy
|
± 0.13 Da
|
|
Maximum SIM Dwell Time
|
5 msec
|
|
Maximum SIM Transitions
|
100 (one time segment)
|
|
Dynamic Range
|
> 6 ƒ” 10^6
|
|
Mass Range
|
10‚3,000 m/z
|
|
Single Point of Control
|
Single-point data system method capability with full control of Agilent 1200 Series LC Systems and 6100 Series Single Quadrupole LC/MS Systems
|
|
Time Programming
|
SIM ion selections, Scan functions, Fragmentor voltage, External CAN valves
|
|
Ionization Sources
|
Electrospray (ESI), Multimode source (simultaneous ESI and APCI), Atmospheric pressure chemical ionization (APCI), ChipCube for intergrated nanoLC, Atmospheric pressure photoionization (APPI)
|
|
Detector
|
High energy conversion dynode and high gain electron multiplier horn
|
|
Vacuum System
|
One turbo-molecular pump with one mechanical pump
|
|
Dimensions (W x H x D)
|
14 x 18 x 25 in. (35 x 45 x 63.5 cm)
|
|
Weight
|
137.6 lb. (63.4 kg.)
|
|
Electrical Requirements
|
200-230VAC, 60Hz or 200-240VAC, 50Hz
|
