The Thermo Scientific 310 CO2 Incubator combines precise CO2 control and temperature for a direct-heat design with convenient high-temperature decontamination. This incubator ensures temperature retention and quick recovery especially important for researchers working with critical cell cultures. The Thermo 310 CO2 incubator provides maximum thermal protection and quick recovery from swings in ambient temperature and power variations.
The Thermo Scientific 3110 CO2 Water Jacketed Incubator combines precise CO2 control and temperature and is the most popular incubator on the market. The Forma Series II Water Jacketed CO2 Incubator, with its precise CO2 and O2 control, elevated RH, and a thermal conductivity sensor, is the first choice for many researchers. These incubators feature unsurpassed temperature stability and superior parameter recovery characteristics, with innovative continuous contamination control technology.
Exterior Dimensions (W x D x H)
24.4 x 28 x 35.4 in
Interior Dimensions (W x D x H)
19.3 x 20.6 x 26.2 in
Volume
170 L
Temperature Range
5° to 50°C
Temperature Uniformity
±0.1°C
CO2 Range
0 to 20%
CO2 Uniformity
±0.15%
Chamber Humidity
95±5% RH
Internal Humidity Recovery
The Thermo Scientific 370 CO2 Incubator combines precise CO2 control and temperature for a direct-heat design with convenient high-temperature decontamination. This incubator ensures temperature retention and quick recovery especially important for researchers working with critical cell cultures. The Thermo 370 CO2 incubator provides maximum thermal protection and quick recovery from swings in ambient temperature and power variations.
External dimensions
620 x 710 x 900 mm (W x D x H)
Internal dimensions
490 x 523x 665 mm (W x D x H)
Interior volume
Access port
Inner diameter: 30 mm, On the back side
Trays
4 trays made of stainless steel containing copper
450 x 450 x 12 mm (W x D x H), Maximum load: 7 kg/tray
Insulation
Rigid polyurethane foamed-in place
Heating system
DHA system (heater jacket + air jacket system)
Heater
314 W
Humidifying system
Natural evaporation with humidifying pan
Temperature controller
PID control system
Temperature display
Digital display
CO2 controller
CO2 density display
Air circulation
Fan assisted
Temperature control range
+5°C above ambient to 50°C (in a 5°C to 35°C ambient).
Temperature control uniformity
±0.25°C in 25°C ambient, setting 37°C, 5% CO2, no load.*
C02 control range and deviation
0% to 20%, ±0.15% in 25°C ambient, setting 37°C, 5% CO2, no load.
C02 sensor platform
Ceramic based, single beam Infrared sensor, with dual wavelength measurement for continuous auto-zero calibration
Air filter
0.3 Pm, Efficiency: 99.97% or higher
UV lamp
4W X 1 (ozone-free emission)
Water level sensor
Optical
Alarms
Automatic set temperature alarm, Automatic set CO2 density alarm,
Upper limit temperature alarm, Door alarm, Low humidifying water alarm,
UV lamp failure alarm (for UV equipped model only)
Remote alarm contacts
Allowable contact capacity: 30 VDC, 2 A
CO2 inlet connection
4 to 6 mm diameter tube
CO2 inlet pressure
0.03 MPaG (0.3 kgf/cm2 G, 4.3 psiG)
Weight
93 kg
The Thermo Forma 3110 Water-Jacketed CO2 Incubator combines precise CO2 control and temperature and is the most popular incubator on the market. The Forma Series II Water Jacketed CO2 Incubator, with its precise CO2 and O2 control, elevated RH, and a choice of T/C (thermal conductivity) or IR (infrared) sensor, is the first choice for many researchers. These incubators feature unsurpassed temperature stability and superior parameter recovery characteristics, with innovative continuous contamination control technology.
+5°C above ambient to 55°C
±0.2°C @ 37°C
Humidity System
3 L pan
Humidity Range
Ambient to 95% @ 37°C
Interior Volume
6.5 cu ft (184.1 L)
Please Call: (603)-601-8511 or 
