Home > Chromatography Brand > Agilent
Sort By:
Page of 9
Agilent 1100 G1323B HPLC Gameboy Controller Agilent 1100 G1323B HPLC Gameboy Controller

Agilent 1100 G1323B HPLC Gameboy Controller


The Agilent 1100 G1323B Gameboy HPLC Controller is for use with HP/Agilent 1100 and 1200 HPLC systems. The Agilent hand-held control module self-configures all modules for total system control using controller-area network (CAN) communication and cabling. All instrument control parameters including column ID can be stored on credit-card sized PCMCIA (PC) cards for error-free transfer between instruments. A liquid-crystal display allows online monitoring of the signal during the run.

Our Price: $620.00
Deal of the Month Price: $525.00
Money Saved: $95.00
Agilent 1200 HPLC G1311A Quat Pump Agilent 1200 HPLC G1311A Quat Pump

Agilent 1200 HPLC G1311A Quat Pump Specifications

Setable Flow Range

0.001 – 10 ml/min, in 0.001 ml/min increments

Flow Range

0.2 – 10.0 ml/min

Flow Precision

£ 0.07% RSD, or £ 0.02 min SD whatever is greater, based on retention time at constant room temperature

Flow Accuracy

± 1% or 10 µl/min whatever is greater

Pressure

Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5880 psi) up to 5 ml/min

Operating range 0 – 20 MPa (0 – 200 bar, 0 – 2950 psi) up to 10 ml/min

Pressure Pulsation

< 2% amplitude (typically < 1%), at 1 ml/min isopropanol, at all pressures > 1 MPa (10 bar)

Recommended pH Range

1.0 – 12.5, solvents with pH > 2.3 should not contain acids which attack stainless steel

Gradient Formation

Low pressure quaternary mixing/gradient capability using proprietary high-speed proportioning valve

Delay volume 800 – 1100 µl, dependent on back pressure

Composition Range

0 – 95% or 5 – 100%, user selectable

Composition Precision

< 0.2% SD, at 0.2 and 1 ml/min

Dimensions (H x W x D)

5.5 x 13.5 x 17 in

Electrical Requirements

100-120 or 22-240 VAC, 50/60 Hz, 220 VA

Our Price: $6,860.00
Agilent 1100 HPLC G1379A Micro Degasser Agilent 1100 HPLC G1379A Degasser

Agilent 1100 HPLC G1379A Degasser Specifications

Maximum Flow Rate

0-5 ml/min per channel

5-10 ml/min at reduced degassing performance

Ambient Operating Temperature

0° to 55°C

Ambient Non-operating Temperature

-40° to 70°C

Power Consumption

30 W

Line Voltage

100-120 220-240 VAC

Line Frequency

50 r 60 Hz

Weight

7kg (15.4 lbs)

Dimensions (W x D x H)

13.5 x 17 x 3.1 in

Our Price: $2,075.00
HP Agilent 1100 HPLC G1329A Autosampler HP Agilent 1100 HPLC G1329A Autosampler

HP Agilent 1100 HPLC G1329A Autosampler Specifications

GLP Features

Early maintenance feedback (EMF), electronic records of maintenance and errors

Communications

Controller-area network (CAN). GPIB (IEEE-448), RS232C, APG-remote standard, optional four external contact closures and BCD vial number output

Safety Features

Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display

Injection Range

0.1 – 100 µl in 0.1 µl increments Up to 1500 µl with multiple draw (hardware modification

required)

Replicate Injections

1 – 99 from one vial

Precision

Typically < 0.5 % RSD of peak areas from 5 – 100 µl

Typically < 1 % RSD of peak areas from 1 – 5 µl

Minimum Sample Volume

1 µl from 5 µl sample in 100 µl microvial, or 1 µl from 10 µl sample in 300 µl microvial

Carryover

Typically < 0.1 %, < 0.05 % with external needle cleaning

Sample Viscosity Range

0.2 – 50 cp

Replicate Injections Per Vial

1 – 99

Sample Capacity

100 × 2-ml vials in 1 tray

40 × 2-ml vials in ½ tray

15 × 6-ml vials in ½ tray (Agilent vials only)

Injection Cycle Time

Typically 50 s depending on draw speed and injection volume

Our Price: $4,555.00
Agilent 1100 HPLC G1311A Quat Pump Agilent 1100 HPLC G1311A Quat Pump

Agilent 1100 HPLC G1311A Quat Pump Specifications

Setable Flow Range

0.001 – 10 ml/min, in 0.001 ml/min increments

Flow Range

0.2 – 10.0 ml/min

Flow Precision

< 0.3% RSD (usually 0.15%), based on retention time, at 1 ml/min

Pressure

Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5880 psi) up to 5 ml/min

Operating range 0 – 20 MPa (0 – 200 bar, 0 – 2950 psi) up to 10 ml/min

Pressure Pulsation

< 2% amplitude (typically < 1%), at 1 ml/min isopropanol, at all pressures > 1 MPa (10 bar)

Recommended pH Range

1.0 – 12.5, solvents with pH > 2.3 should not contain acids which attack stainless steel

Gradient Formation

Low pressure quaternary mixing/gradient capability using proprietary high-speed proportioning valve

Delay volume 800 – 1100 µl, dependent on back pressure

Composition Range

0 – 95% or 5 – 100%, user selectable

Composition Precision

< 0.2% SD, at 0.2 and 1 ml/min

Dimensions (H x W x D)

5.5 x 13.5 x 17 in

Electrical Requirements

100-120 or 22-240 VAC, 50/60 Hz, 220 VA

Our Price: $4,555.00