 |
 |
 |
|
VWR Digital Advanced 2 Block Heater, Cat. #: 75838-320, 230V
Temperature Range
Ambient +5°C to 120°C
Temperature Uniformity
± 0.2°C at 37°C
Temperature Stability
± .2°C at 37°C
- Compact design with a small footprint
- LED display for clear temperature and time readings
- Heats up to 100°C in just 50 minutes
- Holds interchangeable, modular heating blocks
- Reliable performance for various laboratory applications
- Designed for efficient and consistent heating
- Durable construction for long-term use
The VWR Digital Advanced 2 Block Heater, Cat. #: 75838-320, 230V delivers precise temperature control with a range from ambient +5°C to 120°C, ensuring reliable performance for a variety of laboratory applications. With exceptional temperature stability of ± 0.2°C at 37°C, it provides consistent and reproducible results. The compact design optimizes bench space, while the LED display offers clear temperature and time readings for easy monitoring. Designed for efficiency, it features a 50-minute heat-up time to 100°C and accommodates interchangeable modular heating blocks for flexible sample handling.
Please Note: A heat block is NOT INCLUDED with this Dry Bath Heater. If you require a heat block, please inquire.
All of our equipment is fully tested before being shipped.
The VWR Digital Advanced 2 Block Heater, Cat. #: 75838-320, 230V includes:
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
- > Please Note: A heat block is NOT INCLUDED with this Dry Bath Heater. If you require a heat block, please inquire
VWR Digital Advanced 2 Block Heater, Cat. #: 75838-320, 230V Specifications
|
Temperature Range
|
Ambient +5°C to 120°C
|
|
Temperature Stability
|
± .2°C at 37°C
|
|
Temperature Uniformity
|
Within block: ± 0.2°C at 37°C
|
|
Heat Up Time to 100°C
|
50 minutes
|
|
Dimensions (W x D x H)
|
7.7 x 13.7 x 4.6 in. (19.6 x 34.8 x 11.7 cm)
|
|
Weight
|
5.7 lb. (2.6 kg)
|
|
Electrical Requirements
|
230V, 50/60Hz, 0.9A, 190W
|
- Verify the number and correct sizes of heat blocks to ensure compliance with system specifications
- Test functionality of all displays, knobs, and switches, ensuring reliable control and accurate readings
- Inspect all internal wiring for any signs of damage, including frays or compromised insulation
- Clean internal insulation and chamber to maintain optimal thermal efficiency and system hygiene
- Check machine feet and confirm the unit sits properly balanced for stable operation
- Use an independent temperature probe to confirm heating accuracy within the specified temperature range
- Validate temperature uniformity across heat blocks for consistent thermal distribution
- Inspect line cord for any signs of wear, cuts, or damage affecting safety or performance
- Ensure cosmetic condition meets quality standards, free of damage that could impact operation or aesthetics
Technician Inspection and Recertification Checklist: Dry Bath Heater
The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Verify the number and sizes of heat blocks
|
Completed
|
|
|
Test functionality of displays, knobs, and switches
|
Completed
|
|
|
Inspect internal wiring for damage
|
Completed
|
|
|
Clean internal insulation and chamber
|
Completed
|
|
|
Check machine feet for proper balance
|
Completed
|
|
|
Confirm heat within range using an independent probe
|
Completed
|
|
|
Validate temperature uniformity across heat blocks
|
Completed
|
|
|
Inspect line cord for damage
|
Completed
|
|
|
Ensure cosmetic condition is acceptable
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
