 |
 |
 |
|
VWR Digital Advanced 1 Block Heater, Cat. #: 75838-270
Temperature Range
Ambient +5°C to 120°C
Temperature Uniformity
± 0.1°C at 37°C
Temperature Stability
± .1°C at 37°C
- Compact design with a small footprint
- LED display for clear temperature and time readings
- Heats up to 100°C in just 45 minutes
- Holds interchangeable, modular heating blocks
- Reliable performance for various laboratory applications
- Designed for efficient and consistent heating
- Durable construction for long-term use
- Operates at 120V, 50/60Hz with 100W power consumption
The VWR Digital Advanced 1 Block Heater, Cat. #: 75838-270 delivers precise temperature control with a range from ambient +5°C to 120°C, ensuring reliable performance for a variety of laboratory applications. With exceptional temperature stability of ±0.1°C at 37°C and uniformity within the block, it provides consistent and reproducible results. The compact design optimizes bench space, while the LED display offers clear temperature and time readings for easy monitoring. Designed for efficiency, it features a 45-minute heat-up time to 100°C and accommodates interchangeable modular heating blocks for flexible sample handling. Please Note: A heat block is NOT INCLUDED with this Dry Bath Heater. If you require a heat block, please inquire.
All of our equipment is fully tested before being shipped.
The VWR Digital Advanced 1 Block Heater, Cat. #: 75838-270 includes:
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
- > Please Note: A heat block is NOT INCLUDED with this Dry Bath Heater. If you require a heat block, please inquire
VWR Digital Advanced 1 Block Heater, Cat. #: 75838-270 Specifications
|
Temperature Range
|
Ambient +5°C to 120°C
|
|
Temperature Stability
|
± .1°C at 37°C
|
|
Temperature Uniformity
|
Within block: ± 0.1°C at 37°C
|
|
Heat Up Time to 100°C
|
45 minutes
|
|
Dimensions (L x W x H)
|
10.6 x 7.7 x 4.6 in (26.9 x 19.6 x 11.7 cm)
|
|
Weight
|
5 lb. (2.3 kg)
|
|
Electrical Requirements
|
120 V, 50/60 Hz, 100W
|
- Verify the number and correct sizes of heat blocks to ensure compliance with system specifications
- Test functionality of all displays, knobs, and switches, ensuring reliable control and accurate readings
- Inspect all internal wiring for any signs of damage, including frays or compromised insulation
- Clean internal insulation and chamber to maintain optimal thermal efficiency and system hygiene
- Check machine feet and confirm the unit sits properly balanced for stable operation
- Use an independent temperature probe to confirm heating accuracy within the specified temperature range
- Validate temperature uniformity across heat blocks for consistent thermal distribution
- Inspect line cord for any signs of wear, cuts, or damage affecting safety or performance
- Ensure cosmetic condition meets quality standards, free of damage that could impact operation or aesthetics
Technician Inspection and Recertification Checklist: Dry Bath Heater
The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Verify the number and sizes of heat blocks
|
Completed
|
|
|
Test functionality of displays, knobs, and switches
|
Completed
|
|
|
Inspect internal wiring for damage
|
Completed
|
|
|
Clean internal insulation and chamber
|
Completed
|
|
|
Check machine feet for proper balance
|
Completed
|
|
|
Confirm heat within range using an independent probe
|
Completed
|
|
|
Validate temperature uniformity across heat blocks
|
Completed
|
|
|
Inspect line cord for damage
|
Completed
|
|
|
Ensure cosmetic condition is acceptable
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
