 |
 |
 |
|
VWR Analog Vortexer, Cat. #: 89399-880
Speed Range
On Mode: 300 to 2,500 RPM (continuous duty accessories)
Touch Mode: 300 to 3,500 RPM (cup head attachment)
- Ideal for mixing a number of sample container types
- Provides reliable, uniform mixing for repeatable results
- Operates in either “Touch” mode for momentary activation or “On” mode for continuous mixing
- Simple analog display for streamlined user operation
- Compact design conserves valuable bench space
The VWR Analog Vortexer, Cat. #: 89399-880 is a versatile vortexer for operation with both microplates and tubes. Designed for efficiency in sample processing with a wide speed range of 300 to 3,500 RPM with the included cup head attachment, this unit provides users with simple, powerful vortexing while maintaining bench space with a compact design. The VWR 89399-880 Vortexer is additionally capable of operating in touch mode for use of a cup head, or on mode for use of its compatible continuous duty accessories. Tailored to meet the changing needs of modern researchers, the VWR Analog Vortexer, Cat. #: 89399-880 is a great option for labs consistently processing a variety of sample vessels.
All of our equipment is fully tested to perform at factory specifications before being shipped.
The VWR Analog Vortexer, Cat. #: 89399-880 includes:
- > Cup Head Attachment
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
VWR Analog Vortexer, Cat. #: 89399-880 Specifications
|
Speed Range
|
On Mode: 300 to 2,500 RPM (continuous duty accessories)
Touch Mode: 300 to 3,500 RPM (cup head attachment)
|
|
Orbit
|
3.5 mm (0.13 in.)
|
|
Timer
|
N/A
|
|
Controls
|
Analog
|
|
Operating Modes
|
On and touch
|
|
Dimensions (L x W x H)
|
5.4 x 10.5 x 4.5 in. (26.7 x 13.7 x 11.4 cm)
|
|
Weight
|
12 lb. (5.4 kg)
|
|
Electrical Requirements
|
120V, 50/60Hz, 0.25A, 30W
|
- Verify power supply and PCB output correct, stable voltages across all required circuits
- Confirm the correct platform head is installed according to specifications
- Inspect the display for dim or dead pixels, replacing any compromised sections to maintain clear visibility
- Confirm full functionality of all buttons and knobs, ensuring accurate input response
- Verify that touch, pulse, and continuous modes operate fully and as intended
- Inspect all internal wiring for breakages, tears, or wear, replacing any underperforming components to ensure reliability
- Disassemble and thoroughly clean the internal casing to remove any accumulated debris
- Check that the feet are intact and confirm the vortexer is properly balanced on a flat surface
- Conduct a comprehensive cosmetic inspection to ensure all exterior surfaces meet quality standards
Technician Inspection and Recertification Checklist: Vortexer
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Verify power supply and PCB output stable, correct voltages across circuits
|
Completed
|
|
|
Confirm correct platform head is installed according to specifications
|
Completed
|
|
|
Inspect display for dim or dead pixels; replace compromised sections for clarity
|
Completed
|
|
|
Confirm functionality of all buttons and knobs for accurate input response
|
Completed
|
|
|
Verify full operation of touch, pulse, and continuous modes as intended
|
Completed
|
|
|
Inspect internal wiring for damage; replace underperforming components for reliability
|
Completed
|
|
|
Disassemble and clean internal casing to remove accumulated debris
|
Completed
|
|
|
Check feet for integrity and confirm vortexer is balanced on flat surface
|
Completed
|
|
|
Conduct comprehensive cosmetic inspection to ensure quality of exterior surfaces
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
