 |
 |
 |
 |
Thermo Sorvall Legend XT Benchtop Centrifuge
The Thermo Sorvall Legend XT Benchtop Centrifuge offers a
max speed of 15,200 rotations per minute and a max RCF of 24,400 x g. The onboard LCD display makes reading run information simple and
allows for easy parameter entry as well. The timer has a maximum run time of 99
hours and 59 minutes, but also allows for a continuous run mode to allow for an
unlimited run time. Auto-lock rotor system and one-touch lid closure both allow for easy use and save time between applications. Low noise level of 61
dBA makes the Sorvall Legend XT perfect for both small and large laboratories.
This rotor reaches a maximum speed of 4,700 RPM.
Recommended applications include cell culture, microplate, bioproduction, food safety, blood separation, bodily fluids processing, pharmaceutical, biotechnology, stem cell, microbiology, molecular biology, proteomics, and genomics.
All of our equipment is fully tested to perform at factory specifications before being shipped.
Please confirm this rotor meets your application needs and request a different rotor, if necessary. Available rotors can be found in our Rotor Compatibility Guide.
The Thermo Sorvall Legend XT Benchtop Centrifuge includes:
- > TX-750 Swing Bucket Rotor (Cat. #: 75003180)
- > TX-750 Round Buckets (Cat. #: 75003608)
- > Set of 15ml Adapters (Cat. #: 75003639)
- > Set of 50ml Adapters (Cat. #: 75003638) ** Other adapter options may be available upon request **
- > NIST Centrifuge Calibration and Preventative Maintenance Report
- > Power Cord
- > Full 180 Day Parts and Labor Warranty
Thermo Sorvall Legend XT Benchtop Centrifuge Specifcations
Maximum Speed
|
15,200 RPM (Fixed Angle Rotor)
|
Maximum RCF Value
|
25,314 x g
|
Min Speed
|
300 RPM
|
Capacity
|
4 x 1000mL
|
Display
|
LCD digital
|
Noise level
|
<61dBA
|
Timer
|
99 hours, 59 minutes, Continuous mode
|
Dimensions
|
Height: 360mm
Width: 550mm
Depth: 670mm
Table Top Height: 310mm
|
Electrical Requirements
|
120 volts 50/60hz
|
Refrigeration
|
No Refrigeration
|
- Door Latch Assembly Checked for Full Function
- Door Hinges are Checked and Lubed as Needed
- Drive Belt is Checked for Rips and Tears and Replaced if Needed
- Rotors and O-rings are Lubed as Needed
- Lamps and Display are Checked and Replaced if Dim
- Line Cord is Checked for Signs of Fray or Damage and Replaced Accordingly
- Internal Circuitry is Checked for Faulty/Shorted Components and Replaced Accordingly
Thermo Sorvall Legend XT Manual

Click Here to View all the Technical Specs for the Legend XT
Our technicians decontaminate and clean equipment upon arrival at our facility and upon your purchase to create a neutral environment for your labs use.
Preliminary testing is then conducted on our equipment to identify potential defects. Upon completion, we replace all faulty and/or under-performing parts with original manufacturer parts that perform up to specification.
Any parts known to fail or malfunction on the piece of equipment are removed and replaced to insure the extended lifetime of your equipment.
Any necessary preventative maintenance is performed alongside repairs, so your purchase will be ready to go as soon as it arrives.
All of the electronics and boards are tested for proper function and response by our industry trained technicians. Any electronic deficiencies detected are immediately repaired.
Final testing cycles ensure your equipment performs fully at manufacturer specifications, guaranteeing you receive a properly working product ready for use.
Once we finish our rigorous testing and decontamination procedures, your order will be packaged to best protect it during shipment and will include delivery insurance.
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Every product we offer undergoes a rigorous inspection process to verify that all manufacturer specifications are met. All of the electronics and boards are tested for proper function, and any necessary preventative maintenance is performed alongside repairs by our industry trained technicians. Our primary goal is to offer products that are as close to new as possible at an affordable price.
All Lab Equipment is Fully Recertified and Tested
Most Pieces Ship within 2 to 5 Business Days
All Products Come with a Standard Warranty
Trained Customer and Technical Support
Industry Leading Overall Customer Satisfaction
We love shopping at Marshall Scientific! Great products, prices, and performance. Marshall Scientific provides 'tried and true' equipment at a fraction of original purchase price. I always shop here first!
Meg W. / Stanford University
Easy to find what you need with clear specs, website ordering was simple, equipment arrived quickly, very well packaged and working as expected! I couldn't ask for more, I'll definitely use them again!
A. Bradley / Honeywell
They do a very high quality job worth every penny they charge. Customer service is fantastic, they can always be reached by phone or email, and the staff are very knowledgeable and ready to help.
Igor P. / University of Maryland
Click Here to View Our Other Testimonials
|
|
 |
 |
 |
 |


|