 |
 |
 |
|
Thermo Scientific RT Basic Magnetic Stirrer, Cat. #: 88880007
Stirrer Speed
150 to 2,500 RPM
Stirring Capacity
2L (0.5 gal.)
Plate Diameter
4.72 in. (11.9 cm)
- Strong magnetic coupling ensures consistent and stable stirring performance
- Low-profile, lightweight design fits easily into compact laboratory spaces
- Durable polypropylene top and body provide excellent chemical resistance
- Brushless DC motor minimizes heat generation to protect sensitive samples
- Analog control knob allows simple and responsive speed adjustment
- Plug-and-play operation supports quick setup and ease of use
- Ideal for routine laboratory stirring applications across various workflows
The Thermo Scientific RT Basic Magnetic Stirrer, Cat. #: 88880007 is a compact and lightweight solution designed for reliable stirring in routine laboratory applications. Built with a low-profile design and small footprint, this unit fits easily into crowded workspaces while delivering dependable performance for everyday experimental procedures. A strong magnetic coupling ensures consistent stirring, even when working with higher viscosity solutions, while the analog speed control allows users to easily adjust stirring intensity in real time for precise operation.
Constructed with a durable polypropylene top and body, the stirrer offers excellent chemical resistance for long-term laboratory use. The brushless DC motor is designed to operate without generating excess heat, helping protect sensitive samples during operation. With plug-and-play functionality and simple controls, the Thermo Scientific RT Basic Magnetic Stirrer, Cat. #: 88880007 provides efficient, user-friendly performance for a wide range of general laboratory stirring tasks.
All of our equipment will be fully tested to perform at factory specifications before being shipped.
The Thermo Scientific RT Basic Magnetic Stirrer, Cat. #: 88880007 includes:
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
Thermo Scientific RT Basic Magnetic Stirrer, Cat. #: 88880007 Specifications
|
Stirrer Speed
|
150 to 2,500 RPM
|
|
Stirring Capacity
|
2L (0.5 gal.)
|
|
Plate Diameter
|
4.72 in. (11.9 cm)
|
|
Plate Material
|
Polypropylene
|
|
Control
|
Analog
|
|
Weight
|
1.3 lb. (0.6 kg)
|
|
Dimensions (W x D x H)
|
5.1 x 5.1 x 2.6 in. (13 x 13 x 6.5 cm)
|
|
Electrical Requirements
|
100 to 240V, 50/60Hz
|
- Inspect the display for clarity and brightness, replacing any dim or dead pixels to ensure optimal performance.
- Examine external regulators for structural integrity and damage, replacing if necessary (if applicable).
- Assess the functionality of temperature, CO₂, and H₂O sensors, verifying accuracy and consistency (if applicable).
- Check all internal wiring for frays, tears, or breakages, addressing any compromised sections.
- Confirm software settings are properly configured to match the specifications of internal components.
- Inspect and clean the fan for efficient airflow, replacing if wear or malfunction is detected.
- Verify the condition of wheels and leveling mounts, ensuring stability and ease of movement.
- Inspect door gaskets and latches for sealing integrity, replacing if compromised to maintain proper enclosure.
- Calibrate temperature accuracy to 37°C using an NIST-traceable temperature probe for precision.
- Calibrate CO₂ levels to 5% using a Fyrite combustion test kit to verify environmental control (if applicable).
- Confirm temperature and CO₂ stability over a 24-hour period to ensure consistent conditions.
- Conduct a cosmetic inspection, verifying the unit meets appearance and cleanliness standards.
Technician Inspection and Recertification Checklist
The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment
| Task |
Completed? |
Remarks? |
| Inspect display for clarity and replace if needed | Completed | |
| Examine external regulators for integrity and damage | Completed | |
| Assess temperature, CO₂, and H₂O sensors for accuracy | Completed | |
| Check internal wiring for frays, tears, or breakages | Completed | |
| Confirm software settings match internal component specs | Completed | |
| Inspect and clean fan, replacing if wear is detected | Completed | |
| Verify condition of wheels and leveling mounts | Completed | |
| Inspect door gaskets and latches for sealing integrity | Completed | |
| Calibrate temperature to 37°C with NIST-traceable probe | Completed | |
| Calibrate CO₂ to 5% with Fyrite combustion test kit | Completed | |
| Confirm 24-hour temperature and CO₂ stability | Completed | |
| Conduct cosmetic inspection to ensure appearance standards | Completed | |
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
