Home > Brand > Thermo Scientific >

Thermo Scientific 3110 CO2 Water Jacketed Incubator
Thermo Scientific 3110 CO2 Water Jacketed Incubator
Click Here to View the Technical Specs for the 3110
Alternative Views:

Our Price: $4,460.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 90-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 4 to 8 Business Days

Request a Formal Quote

Quantity in Stock:4
Product Code: TS-3110

Recertification Protocol
Technical Specification Sheet (NEW)

Thermo Scientific 3110 CO2 Water Jacketed Incubator

The Thermo Scientific 3110 CO2 Water Jacketed Incubator combines precise CO2 control and temperature and is the most popular incubator on the market. The Forma Series II Water Jacketed CO2 Incubator, with its precise CO2 control, elevated RH, and a thermal conductivity sensor, is the first choice for many researchers. These incubators feature unsurpassed temperature stability and superior parameter recovery characteristics, with innovative continuous contamination control technology. The Forma 3110's 100% HEPA filtration quickly achieves Class 100 air quality. The HEPA filter entraps particulate air contaminants and prevents their escape, and filter efficiency increases as particulates and micro-organisms are entrapped.

Temperature retention and quick recovery are especially important for researchers working with critical cell cultures. The Thermo Scientific 3110 CO2 Water Jacketed Incubator provides maximum thermal protection and quick recovery from swings in ambient temperature and power variations.

All of our equipment is fully tested to perform at factory specifications before being shipped.

The Thermo Scientific 3110 CO2 Water Jacketed Incubator includes:
  • > 3 Shelves
  • > Drain Tray
  • > New Hepa Filter
  • > Calibration
  • > Power Cord
  • > Operator's Manual
  • > Full 90 Day Parts and Labor Warranty

Thermo Scientific 3110 CO2 Water Jacketed Incubator Specifications



± 0.1°C

Temp Range

5°C to 55°C

Tracking Alarm

Programmable High/Low


CO2 Control

Better than 0.1%

CO2 Range


Inlet Pressure

15 PSIG (1.0 bar)

CO2 Sensor




Tracking Alarm

User programmable High/Low



Ambient or 95% @ 37°C

Humidity Pan

3.2qt standard

Optional Display

In 1% increments

Inlet Pressure:

Maximun Per Channel

40.8 sq ft.

Standard Maximum




Precision thermistor


Independent Analog




Water Jacket Volume

11.7 gallons

Interior Volume

6.5 cu ft.


Stainless steel


Coiled rolled steel

Outlet Door Gasket

Four sided magnetic vinyl

Interior Door Gasket

Feather edge silicon.

Click Here to View all the Technical Specs for the 3110

Why Buy From Marshall Scientific?

Every product we offer undergoes a rigorous inspection process to verify that all manufacturer specifications are met. All of the electronics and boards are tested for proper function, and any necessary preventative maintenance is performed alongside repairs by our industry trained technicians. Our primary goal is to offer products that are as close to new as possible at an affordable price.

All Lab Equipment is Fully Recertified and Tested

Most Pieces Ship within 2 to 5 Business Days

All Products Come with a Standard Warranty

Trained Customer and Technical Support

Industry Leading Overall Customer Satisfaction

Marshall Scientific's Recertification Protocol


Our technicians decontaminate and clean all equipment upon arrival and upon purchase to create a neutral environment for lab use.

Preliminary testing is conducted to identify potential product defects, upon completion, we replace all faulty and/or under-performing parts with original manufacturer parts that perform up to specification.

Any parts known to fail or malfunction from excessive use are removed and replaced to insure the extended lifetime of your equipment.

Any necessary preventative maintenance is performed alongside repairs, so your purchase will be ready to go as soon as it arrives.

All electronics and boards are tested for proper function and response by our industry trained technicians. Any electronic deficiencies detected are immediately repaired.

Final testing cycles ensure your instrument performs fully at manufacturer specifications, guaranteeing you receive a properly working product ready for use.

Once we finish our rigorous testing and decontamination procedures, your order will be packaged to best protect it during shipment and will include delivery insurance.

Stanford University
We love shopping at Marshall Scientific! Great products, prices, and performance. Marshall Scientific provides 'tried and true' equipment at a fraction of original purchase price. I always shop here first!
Meg W. / Stanford University
Easy to find what you need with clear specs, website ordering was simple, equipment arrived quickly, very well packaged and working as expected! I couldn't ask for more, I'll definitely use them again!
A. Bradley / Honeywell
University of Maryland
They do a very high quality job worth every penny they charge. Customer service is fantastic, they can always be reached by phone or email, and the staff are very knowledgeable and ready to help.
Igor P. / University of Maryland
Click Here to View Our Other Testimonials

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 2 Write a review »

  8 of 8 people found the following review helpful:
5 of 5 Satisfied February 25, 2021
Reviewer: Reed Scherr from Los Angeles, California  
The price was good, the item works and comes with a warranty. Excellent company to work with.

Was this review helpful to you?

  7 of 7 people found the following review helpful:
5 of 5 Looks Great September 3, 2020
Reviewer: Gary Waters from Cambridge, MA  
Looks basically new. The incubator was easy to calibrate and meets my needs. I appreciate the prompt customer service and swift delivery.

Was this review helpful to you?

Browse for more products in the same category as this item:

Brand > Thermo Scientific
Incubator Type > CO2 Incubators
Incubator Type
Incubator Type > Water Jacketed