Home > Incubator Shakers >

New Brunswick Innova 4080 Incubator Shaker

Net 30 Terms and Financing Available

Our Price: $4,995.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 180-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 6 to 8 Business Days
Included Documentation: NIST Calibration and Preventative Maintenance Report

Request a Formal Quote

Quantity in Stock:1

Product Code: NB-4080

Qty:

Description

Recertification Protocol

Technical Specification Sheet

New Brunswick Innova 4080 Incubator Shaker

The New Brunswick Innova 4080 Incubator Shaker offers rigid temperature and agitation control in a benchtop design. This large-capacity shaker can culture a wide array of samples in test tubes and flasks up to 2.8 L. The Innova 4080s microprocessor controls allow for uniform heating and motion and accurate regulation of shaking speed, automatically compensating for changes in temperature using a large capacity blower. The system includes many safety feature, such as automatic cut-out when lid is opened, fail-safe thermostat for high temperature, and standard audible and visual alarms with timer.

Recommended for various molecular biology techniques, including hybridization studies, plasmid preps, DNA fingerprinting and more.

All of our equipment is fully tested to perform at factory specifications before being shipped.

INCLUDED:
The New Brunswick Innova 4080 Incubator Shaker includes:

> 18" x 18" Platform
> NIST Calibration and Preventative Maintenance Report
> Power Cord
> Operator's Manual
> Full 180 Day Parts and Labor Warranty

New Brunswick Innova 4080 Incubator Shaker Specifications

Temperature Range	5 above ambient to 80C
Temperature Accuracy	0.1 @ 30-40C range
Speed	25 to 500 rpm
Speed Accuracy	1 rpm
Platform Size	18 x 18 in
Maximum Capacity	18 x 250 mL flasks on universal platform
Orbital Diameter	0.75 in
Exterior Dimensions (W x D x H)	21 x 27.5 x 19.75 in
Chamber Dimensions (W x D x H)	19.75 x 19 x 13.25 in
Weight	150 lbs
Timer	0.1 to 99.9 hours

New Brunswick Innova 4080 Incubator Shaker Manual

Click Here to View all the Technical Specs for the Innova 4080

Request a Formal Quote

Inspection and Recertification Checklist

Examine the chamber glass for cracks or chips, replacing it as needed to maintain structural integrity.
Inspect door seals for signs of wear or damage, replacing them to ensure a tight seal.
Check the display for brightness and clarity, replacing any dim or dead pixels to maintain optimal visibility.
Test all buttons to confirm full functionality and consistent responsiveness.
Replace all platform assembly bearings to ensure smooth and reliable motion.
Inspect the drive belt for wear, replacing it if torn or cracked to maintain performance.
Examine all wiring for frays, tears, or breakages, addressing any issues for electrical safety.
Verify each PCB test point, replacing any malfunctioning components to ensure system reliability.
Check drive belt tension to confirm correct alignment and function.
Confirm the compressor’s operation, cleaning condenser filter and fins for efficient cooling.
Calibrate internal temperature accuracy using an NIST-traceable temperature probe.
Measure and calibrate platform RPMs with an NIST-traceable tachometer to ensure precision.
Conduct a final cosmetic inspection to verify all surfaces meet appearance standards.

Technician Inspection and Recertification Checklist

The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment

Task	Completed?	Remarks?
Examine chamber glass for cracks or chips, replace as needed	Completed
Inspect door seals for wear, replace to ensure tight seal	Completed
Check display brightness, replace dim or dead pixels	Completed
Test all buttons for full functionality and responsiveness	Completed
Replace platform assembly bearings for reliable motion	Completed
Inspect drive belt for wear, replace if torn or cracked	Completed
Examine wiring for frays or breakages, repair as needed	Completed
Verify PCB test points, replace faulty components	Completed
Check drive belt tension for proper alignment	Completed
Confirm compressor functionality, clean filter and fins	Completed
Calibrate internal temperature with NIST probe	Completed
Calibrate platform RPM with NIST-traceable tachometer	Completed
Conduct cosmetic inspection for appearance standards	Completed