 |
 |
 |
|
Popular Alternative Choice
Benchmark SB0012 SB-12L Shaking Water Bath
- Belt-less motor drive, temperature control up to 80C.
- 12L capacity with a universal spring-loaded platform.
- Digital controls for time, temperature & shaking speed.
- Speed Range: 30-200 RPM with 25mm (1 in) orbit.
Go to Product Details
Free Shipping and No Lead Time!
New Brunswick Innova 3100 Reciprocal Shaking Water Bath
The New Brunswick Innova 3100 Reciprocal Shaking Water Bath provides precise temperature control. This automated water bath shaker is ideal for culturing a wide range of cell types at temperatures up to 80 C. Dependable operation is due in large part to the New Brunswick triple-eccentric counterbalanced drive. Larger-capacity than many water bath shakers, the Innova 3100 easily accommodates tubes and flasks up to 2 Liters. A temperature range of 5 C above ambient to 80 C provides for a wide range of laboratory work, using molecular and cell biology protocols. All of our equipment will be fully tested to perform at factory specifications before being shipped.
The New Brunswick Innova 3100 Reciprocal Shaking Water Bath includes:
- > Stainless Steel Cover
- > Shaker Tray
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
New Brunswick Innova 3100 Reciprocal Shaking Water Bath Specifications
|
Temperature Range
|
Ambient +5C to 80C
|
|
Temperature Uniformity
|
0.25C at 37C
|
|
Speed Range
|
25 to 400 RPM
|
|
Control
|
Digital
|
|
Capacity
|
15L
|
|
Bath Dimensions (L x W x H)
|
17.5 x 13.25 x 8 in (43 x 35 x 20 cm)
|
|
Electrical Requirements
|
120V, 50/60Hz, 1100VA
|
| Timer |
0.1 to 99.9 hours or continuous |
| Balanced Drive Mechanism |
Triple-eccentric |
| Memory |
Non-volatile with automatic power failure restart |
| Motor Type |
DC brushless |
| Orbit |
1.3 cm |
| Platform Size |
12 x 16.5 in (31 x 42 cm) |
- Confirm power supply and PCB are outputting stable, correct voltages across all essential circuits to ensure reliable operation
- Inspect the display for any dim, flickering, or dead pixels, replacing any compromised sections to maintain full clarity and accurate readouts
- Verify that all buttons, knobs, and switches are functioning properly, providing precise and responsive control across all settings
- Conduct a thorough inspection of the water reservoir for any holes, rust, or other structural damage that may impact its integrity
- Fill the reservoir with water, checking closely for any external or internal leaks that could affect performance
- Examine the lid for any signs of wear or damage, replacing hinges and handles if necessary to ensure a secure and proper seal
- Inspect for any internal leaks originating from the water reservoir, confirming the unit’s internal plumbing integrity
- Conduct a comprehensive inspection of internal wiring for any breakages, tears, or wear; replace any underperforming or damaged components to maintain safe operation
- Examine internal insulation for signs of burns, breaks, or deterioration, replacing as needed to ensure thermal efficiency and safety
- Confirm that all feet are intact and that the bath sits level and balanced on a flat surface to prevent movement or instability
- Calibrate both temperature accuracy and uniformity using a NIST-traceable temperature probe, verifying compliance with specification standards
- Perform a detailed cosmetic inspection to confirm that all external surfaces and finishes meet aesthetic and quality standards
Technician Inspection and Recertification Checklist: Water Bath
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Confirm power supply and PCB output stable, correct voltages across circuits
|
Completed
|
|
|
Inspect display for dim, flickering, or dead pixels; replace for clarity
|
Completed
|
|
|
Verify functionality of all buttons, knobs, and switches for responsive control
|
Completed
|
|
|
Inspect water reservoir for holes, rust, or structural damage
|
Completed
|
|
|
Fill reservoir with water; check for external or internal leaks
|
Completed
|
|
|
Examine lid for wear or damage; replace hinges or handles as needed
|
Completed
|
|
|
Inspect for internal leaks from water reservoir to confirm plumbing integrity
|
Completed
|
|
|
Check internal wiring for damage; replace underperforming components for safety
|
Completed
|
|
|
Examine internal insulation for burns, breaks, or deterioration; replace as needed
|
Completed
|
|
|
Confirm feet are intact and bath is balanced on flat surface
|
Completed
|
|
|
Calibrate temperature accuracy and uniformity with NIST-traceable probe
|
Completed
|
|
|
Perform cosmetic inspection to confirm quality of external surfaces and finishes
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
