New Arrivals | Marshall Scientific

Agilent 1260 Infinity II HPLC G7117C DAD Detector HS Specifications

Detection Type	1024-element photodiode array
Light Source	Deuterium and tungsten lamps
Number of Signals	8
Data Rate	120 Hz (both spectra and signals)
Wavelength Range	190 to 640 nm
Short Term Noise	< ± 3 x 10 ^-6 AU at 230/4 nm, slit width 4 nm, TC 2 s, ASTM
Drift	< 0.5 x 10 ^-3 AU/h at 230 nm
Linearity	> 2 AU (5%) at 265 nm Typically 2.5 AU (5%)
Wavelength Accuracy	± 1 nm
Wavelength Bunching	Programmable, 2 to 400 nm in steps of 1 nm
Slit Width	1, 2, 4, 8, 16 nm
Diode Width	~ 0.5 nm

Our Price: $14,795.00

Sale Price: $12,795.00

Money Saved: $2,000.00

1 in stock!

Agilent 1260 Infinity II HPLC G7165A MWD Detector

Detection Type	1024-element photodiode array
Light Source	Deuterium and tungsten lamps
Number of Signals	8
Data Rate	120 Hz (both spectra and signals)
Wavelength Range	190 to 950 nm
Short Term Noise (ASTM)	< ± 0.7 x 10 ^-5 AU at 254 nm and 750 nm
Drift	< 0.9 x 10 ^-3 AU/h at 254 nm
Linear Absorbance Range	< 2 AU (5%) at 265 nm
Wavelength Accuracy	± 1 nm
Wavelength Bunching	1 to 400 nm
Slit Width	1, 2, 4, 8, 16 nm
Diode Width	< 1 nm

Our Price: $10,995.00

1 in stock!

BioTek ELx808 UV Microplate Reader - Absorbance Only

Our Price: $4,995.00

1 in stock!

Agilent 1260 Infinity I HPLC G1314F VWD Detector

Detection Type	Double-beam photometer
Light Source	Deuterium lamp
Wavelength Range	190 - 600 nm
Noise	< ± 0.25 x 10-5 AU, at 230 nm
Drift	1 x 10-4 AU/hr, at 230 nm
Linearity	>2.5 AU upper limit
Wavelength Accuracy	± 1 nm, self-calibration with deuterium lines, verification with holmium oxide filter
Wavelength Precision	< ± 0.1 nm
Slit Width	6.5nm typical over whole wavelength range

Our Price: $6,995.00

1 in stock!

Pressure	Operating range 0 - 60 MPa (0 - 600 bar, 0 - 8700 psi)
GLP Features	Early maintenance feedback (EMF), electronic records of maintenance and errors
Communications	Controller-area network (CAN), RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
Safety Features	Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display
Injection Range	0.1 – 100 µL in 0.1 µL increments (recommended 1 µl increments) Up to 40 µL with reduced injection volume kit (hardware modification required) Up to 1500 µl with multiple draw (hardware modification required)
Precision	< 0.25 % from 5 – 40 µL < 0.5 % from 2 – 5 µL < 0.7 % from 1 – 2 µL < 1.5 % from 0.5 – 1 µL
Carryover	Typically < 0.004%
Sample Viscosity Range	0.2 – 5 cp
Metering Devices	Metering pump in high pressure flow path
Sample Capacity	2 x well plates (MTP) + 10 x 2 ml vials 108 x 2 ml vials in 2 x 54 vial plate plus 10 additional 2 ml vials 30 x 6 ml vials in 2 x 15 vial plate 100 Micro vial tray 54 Eppendorf tubes (0.5/1.5/2 ml) in 2 x 27 Eppendorf tube plate
Injection Cycle Time	Typically < 21 s using default conditions and injections volume of 5 µL

Our Price: $7,995.00

1 in stock!

Chamber Volume	85L (22 gal.)
Sterilization Temperature Range	105ºC to 135ºC
Chamber Dimensions (Diameter x H)	15.2 x 24.2 in. (38 x 76 cm)
Electrical Requirements	208V/220V/240V, 50/60 Hz, single phase, 3000W

Our Price: $8,995.00

1 in stock!

Thermo Scientific Steri Cycle 380 CO2 Incubator

Our Price: $4,995.00

1 in stock!