 |
 |
 |
|
Lab Armor 6L Digital Bead Bath
Temperature Range
Ambient +5°C to 80°C
Temperature Uniformity
± 1.0°C at 37°C
Capacity
6L (0.21 cu. ft.)
- Eco-friendly alternative to traditional water baths with up to 50% greater energy efficiency
- Designed specifically to work with Lab Armor Beads for superior performance
- Exceptional temperature stability of ± 0.1°C at 37°C
- Digital control system allows fast heat-up times and precise adjustments
- Recommended 5L bead volume for proper operation
- Eliminates evaporation, spills, and the need for harmful germicides
- Functions like an always-on incubator for dependable readiness
- Reduces contamination risks and simplifies maintenance
- Provides consistent, reproducible results for a variety of laboratory workflows
The Lab Armor 6L Digital Bead Bath is an advanced alternative to conventional laboratory water baths, delivering energy efficiency, durability, and unmatched contamination control. Specifically designed for use with Lab Armor Beads, this system provides a more consistent and reliable environment for sample preparation and incubation. The bath operates within a broad temperature range of Ambient +5°C to 80°C, with outstanding temperature uniformity of ± 1.0°C and stability of ± 0.1°C at 37°C, ensuring accurate and reproducible results across a variety of applications. A user-friendly digital control panel allows precise adjustments and rapid heat-up, eliminating long warm-up delays that are common with water-based systems.
Offering a 6L (0.21 cu. ft.) capacity, this bath provides efficiency in sample processing in a compact footprint. Unlike traditional baths, the bead bath requires no water, which means there is nothing to evaporate, spill, or contaminate, and no need for harsh germicides. This design not only makes it safer and easier to maintain but also reduces operating costs by being up to 50% more energy efficient. Always ready to use, the Lab Armor Bead Bath performs like a dependable, always-on-incubator, providing researchers with greater confidence in their work while supporting a cleaner, greener laboratory environment. Please Note: This Bead Bath is designed for use with thermal beads only and will NOT work with water or any other liquid media.
All of our equipment will be fully tested to perform at factory specifications before being shipped.
The Lab Armor 6L Digital Bead Bath includes:
- > Bath Lid
- > 5L of Thermal Beads
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
Lab Armor 6L Digital Bead Bath Specifications
|
Temperature Range
|
Ambient +5°C to 80°C
|
|
Temperature Uniformity
|
± 1.0°C at 37°C
|
|
Temperature Stability
|
± 0.1°C at 37°C
|
|
Control
|
Digital
|
|
Capacity
|
6L (0.21 cu. ft.)
|
|
Recommended Thermal Bead Volume
|
5L
|
|
Bath Dimensions (W x D x H)
|
12 x 6.1 x 6 in. (30.5 x 15.5 x 15.2 cm)
|
|
Exterior Dimensions (W x D x H)
|
15.9 x 12.3 x 8.5 in. (40.4 x 31.2 x 21.6 cm)
|
|
Weight
|
13 lb. (5.9 kg)
|
|
Electrical Requirements
|
100-120V, 50/60Hz, 3.0A
|
- Confirm power supply and PCB are outputting stable, correct voltages across all essential circuits to ensure reliable operation
- Inspect the display for any dim, flickering, or dead pixels, replacing any compromised sections to maintain full clarity and accurate readouts
- Verify that all buttons, knobs, and switches are functioning properly, providing precise and responsive control across all settings
- Conduct a thorough inspection of the water reservoir for any holes, rust, or other structural damage that may impact its integrity
- Fill the reservoir with water, checking closely for any external or internal leaks that could affect performance
- Examine the lid for any signs of wear or damage, replacing hinges and handles if necessary to ensure a secure and proper seal
- Inspect for any internal leaks originating from the water reservoir, confirming the unit’s internal plumbing integrity
- Conduct a comprehensive inspection of internal wiring for any breakages, tears, or wear; replace any underperforming or damaged components to maintain safe operation
- Examine internal insulation for signs of burns, breaks, or deterioration, replacing as needed to ensure thermal efficiency and safety
- Confirm that all feet are intact and that the bath sits level and balanced on a flat surface to prevent movement or instability
- Calibrate both temperature accuracy and uniformity using a NIST-traceable temperature probe, verifying compliance with specification standards
- Perform a detailed cosmetic inspection to confirm that all external surfaces and finishes meet aesthetic and quality standards
Technician Inspection and Recertification Checklist: Water Bath
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Confirm power supply and PCB output stable, correct voltages across circuits
|
Completed
|
|
|
Inspect display for dim, flickering, or dead pixels; replace for clarity
|
Completed
|
|
|
Verify functionality of all buttons, knobs, and switches for responsive control
|
Completed
|
|
|
Inspect water reservoir for holes, rust, or structural damage
|
Completed
|
|
|
Fill reservoir with water; check for external or internal leaks
|
Completed
|
|
|
Examine lid for wear or damage; replace hinges or handles as needed
|
Completed
|
|
|
Inspect for internal leaks from water reservoir to confirm plumbing integrity
|
Completed
|
|
|
Check internal wiring for damage; replace underperforming components for safety
|
Completed
|
|
|
Examine internal insulation for burns, breaks, or deterioration; replace as needed
|
Completed
|
|
|
Confirm feet are intact and bath is balanced on flat surface
|
Completed
|
|
|
Calibrate temperature accuracy and uniformity with NIST-traceable probe
|
Completed
|
|
|
Perform cosmetic inspection to confirm quality of external surfaces and finishes
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
