 |
 |
 |
|
Hach TL2310 Benchtop Turbidimeter
Repeatability
± 1% of reading or 0.01 FNU/NTU, whichever is greater (under reference conditions)
Accuracy
± 2% of reading plus 0.01 FNU/NTU from 0 to 1000 FNU/NTU
- Intuitive 7-inch color touchscreen interface simplifies operation and guided workflows
- Automatic sample stability detection guarantees accurate and reliable readings
- Built-in self-diagnostics maintain instrument readiness and minimize downtime
- Dual USB-A ports support data export, external printer connection, and barcode scanning
- Compatible with 25 mm borosilicate glass sample cells with rubber-lined screw caps
- Air purge connection supports dry nitrogen or instrument-grade air for optimal measurement stability
- Durable and reliable design ensures dependable turbidity testing across routine laboratory workflows
The Hach TL2310 Benchtop Turbidimeter provides accurate, reliable, and repeatable turbidity measurements that meet ISO 7027 standards, making it ideal for water quality analysis in laboratory environments. Its LED light source (860 ± 30 nm) ensures long-term optical stability and precise results across a 0–1000 NTU range. Built for consistent performance under demanding workloads, the TL2310 combines high-quality optics with durable construction to maintain accuracy and reproducibility over extended operation.
Featuring a vivid 7-inch color touchscreen interface, the TL2310 simplifies every stage of testing with intuitive menus, guided calibration, and easy-to-follow measurement workflows. Automatic sample stability detection captures results only when conditions are steady, reducing variability and rework. Fast USB data export, onboard diagnostics, and multilingual functionality further support seamless workflow management. Designed for reliability and efficiency, the Hach TL2310 Benchtop Turbidimeter delivers trusted, standards-compliant results for daily laboratory turbidity testing.
Please Note: Instrument grade air or dry nitrogen source are required for use of air purge system and are not included with purchase.
All of our equipment is fully tested to perform at factory specifications before being shipped.
The Hach TL2310 Benchtop Turbidimeter includes:
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
Hach TL2310 Benchtop Turbidimeter Specifications
|
Range
|
NTU/FNU: 0 to 1000
|
|
Reading Modes
|
Single, continuous, Rapidly Settling Turbidity™, signal averaging on or off
|
|
Repeatability
|
± 1% of reading or 0.01 FNU/NTU, whichever is greater (under reference conditions)
|
|
Response Time
|
Signal averaging off: 6.8 seconds
Signal averaging on: 14 seconds (when 10 measurements are used to calculate the average)
|
|
Sample Cell Compatibility
|
Round cells 95 x 25 mm (3.74 x 1 in.) borosilicate glass with rubber-lined screw caps
|
|
Sample Requirements
|
25 mm sample cell: 20 mL minimum
0 to 70°C (32 to 158°F)
|
|
Light Source
|
LED at 860 ± 30 nm
|
|
Stabilization Time
|
Immediate
|
|
Accuracy
|
± 2% of reading plus 0.01 FNU/NTU from 0 to 1000 FNU/NTU
|
|
Display
|
17.8 mm (7 in.) color touch screen
|
|
Interface
|
2 USB-A ports for USB flash drive, printer, keyboard, and barcode scanner
|
|
Air Purge Requirements
|
Dry nitrogen or instrument grade air (ANSI MC 11.1, 1975) 0.1 scfm at 69 kPa (10 psig); 138 kPa (20 psig) maximum
Hose barb connection for 1/8-inch tubing
|
|
Measurement Method
|
Nephelometric
|
|
Operating Temperature Range
|
0 to 40°C (32 to 104°F)
|
|
Storage Conditions
|
-20 to 60°C (-4 to 140°F)
|
|
Units
|
FNU and NTU
|
|
Regulatory
|
Meets ISO 7027, DIN EN 27027, DIN 38404, ASTM D7315, and ASTM D6855
|
|
Dimensions (W x D x H)
|
15.6 x 12.0 x 6.0 in. (39.5 x 30.5 x 15.3 cm)
|
|
Weight
|
6.4 lb. (2.9 kg)
|
|
Electrical Requirements
|
100–240V, 50/60Hz, 3.4A
|
|
|
|
 |
|
 |
|
