Home > Chromatography > HPLC
Choose a sub category:
Agilent Waters
Sort By:
Page of 7
Agilent 1100 HPLC G1315B DAD Detector Agilent 1100 HPLC G1315B DAD Detector

Agilent 1100 HPLC G1315B Diode Array Detector


The Agilent 1100 G1315B Diode Array Detector verifies separation quality with peak purity, multiple signals, and spectral libraries during your analytical quantification, offering an extended wavelength range with the highest sensitivity. The VWD and diode array detectors allow for automated wavelength verification for performance tracking. The Agilent 1100’s temperature management system ensures optimum baseline stability-even under rough ambient conditions. This detector features superb illumination using combined deuterium and tungsten lamps for the highest intensity and lowest detection limit from 190 to 950 nm, 1024 diodes and 1-nm slit for highest spectral resolution. The programmable slit helps you explore the spectral landscape for faster sample characterization, ensuring higher sensitivity or lower baseline noise as necessary on the 1100. Slit settings can be stored and reported from 1 – 16 nm with raw data for GLP traceability.

Our Price: $4,795.00
Special Offer: $4,795.00
Agilent 1100 HPLC G1316A Column Compartment Agilent 1100 HPLC G1316A Column Compartment

Agilent 1100 HPLC G1316A Column Compartment Specifications

Temperature Range

Range 10° below ambient to 80° C

Temperature Stability

± 0.15°C

Temperature Accuracy

± 0.8°C

Column Capacity

Three 30cm columns

Warm-up/Cool Down

5 mins from ambient to 40°C


Our Price: $2,295.00
Special Offer: $2,135.00
Money Saved: $160.00
Agilent 1100 HPLC Solvent Tray Agilent 1100 HPLC Solvent Tray

Our Price: $140.00
Special Offer: $110.00
Money Saved: $30.00
Agilent 1100 HPLC G1311A Quat Pump Agilent 1100 HPLC G1311A Quat Pump

Agilent 1100 HPLC G1311A Quat Pump


The Agilent 1100 G1311A Quaternary Pump ensures virtually pulse-free and stable solvent flow, with dual floating pistons in series, precisely servo-controlled. This design with variable stroke volume allows pulse-free solvent delivery and efficient mixing. An inlet-valve electronically activated and synchronized to piston stroke eliminates vapor formation with volatile solvents and is maintenance free. The Agilent quaternary pump is equipped with a high-speed proportioning valve and pre-configured vacuum degasser for convenient low-pressure mixing of up to four solvents and highest flexibility in solvent choices.

Our Price: $4,695.00
Special Offer: $4,295.00
Money Saved: $400.00
HP Agilent 1100 HPLC Solvent Tray HP Agilent 1100 HPLC Solvent Tray

Our Price: $120.00
Special Offer: $95.00
Money Saved: $25.00
Waters 996 HPLC Photo Diode Array Detector Waters 996 HPLC Photodiode Array Detector

Waters 996 HPLC Photodiode Array Detector Specifications

Wavelength Range

190 to 800 nm

Wavelength Accuracy

±1 nm

Linearity Range

5% over -0.1 to 2.0 AU

Spectral Resolution

1.2 nm per photodiode

Baseline Noise

5 x 10 -5 AU peak-to-peak

Drift

1 x 10 -3 AU/hour at 254 nm (after warmup)

Operating Temperature

4 to 40°C (39° to 104°F)

Operating Humidity

20 to 80% non-condensing

Flow Cells

Standard Pathlength: 10 mm

Semi-Preparative Pathlength: 3 mm

Microbore Pathlength: 6 mm

Inert Pathlength: 10 mm

Our Price: $2,495.00
Agilent 1100 HPLC G1313A Autosampler Agilent 1100 HPLC G1313A Autosampler

Agilent 1100 HPLC G1313A Autosampler Specifications

GLP Features

Early maintenance feedback (EMF), electronic records of maintenance and errors

Communications

Controller-area network (CAN). GPIB (IEEE-448), RS232C, APG-remote standard, optional four external contact closures and BCD vial number output

Safety Features

Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display

Injection Range

0.1 – 100 µl in 0.1 µl increments Up to 1500 µl with multiple draw (hardware modification required)

Replicate Injections

1 – 99 from one vial

Precision

Typically < 0.5 % RSD of peak areas from 5 – 100 µl

Typically < 1 % RSD of peak areas from 1 – 5 µl

Minimum Sample Volume

1 µl from 5 µl sample in 100 µl microvial, or 1 µl from 10 µl sample in 300 µl microvial

Carryover

Typically < 0.1 %, < 0.05 % with external needle cleaning

Sample Viscosity Range

0.2 – 50 cp

Replicate Injections Per Vial

1 – 99

Sample Capacity

100 × 2-ml vials in 1 tray

40 × 2-ml vials in ½ tray

15 × 6-ml vials in ½ tray (Agilent vials only)

Injection Cycle Time

Typically 50 s depending on draw speed and injection volume

Our Price: $4,795.00
Special Offer: $4,455.00
Money Saved: $340.00