 |
 |
 |
|
Fisherbrand Isotemp Cooling Thermal Shake Touch, Cat. #: 02217737
Speed Range
300 to 3,000 RPM (300 to 2,200 RPM with Included Block)
Temperature Range
Ambient -17°C to 100°C
- Heating, cooling, and shaking functions for consistent and precise results
- 4.3-inch color touchscreen with live status bar and on-screen help
- Interchangeable blocks support various tube and microplate formats
- Program control for up to five programmable, five-step methods
- Cool-touch, chemical-resistant housing ensures safe operation
- USB port allows data logging, program storage, and software updates
The Fisherbrand Isotemp Cooling Thermal Shake Touch, Cat. #: 02217737 is designed for reliability and precise control within consistent workflows. It sets the standard for thermal shakers with a wide speed range from 300 to 3,000 RPM and fast heating rate of 5°C per minute. The PID Temperature controller additionally ensures accurate temperature control within the units wide range of -17°C to 100°C while a temperature limiting function safeguards samples in adhering to user defined temperature parameters.
Equipped with a simple touchscreen display providing control of up to 5 programs at five steps each, the Fisherbrand 02217737 Thermal Shake touch is an incredible option for labs requiring a thermal shaker with advanced application tailored operation. Its LCD touch screen is additionally equipped with operational tips and and on-screen help topics, guaranteeing accessibility to experienced and new users alike. These features, along with a single point calibration procedure for up to 6 temperature levels, give users the efficiency needed for high throughput processing without compromising precise control in sensitive applications.
All of our equipment is fully tested to perform at factory specifications before being shipped.
The Fisherbrand Isotemp Cooling Thermal Shake Touch, Cat. #: 02217737
includes:
- > 1.5ml Block & Cover
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
Fisherbrand Isotemp Cooling Thermal Shake Touch, Cat. #: 02217737
Specifications
|
Speed Range
|
300 to 3,000 RPM (300 to 2,200 RPM with Included Block)
|
|
Speed Accuracy
|
± 2%
|
|
Temperature Range
|
Ambient -17°C to 100°C
|
|
Temperature Accuracy
|
± 0.5°C between 20°C and 45°C
± 2°C below 20°C and above 45°C
|
|
Heating Rate
|
5°C/minute
|
|
Cooling Rate
|
Above Ambient: 2 to 3°C/minute
Below Ambient: 0.5 to 1°C/minute
|
|
Timer
|
1 minute to 99 hours, 59 minutes
|
|
Orbit
|
3mm (0.12 in.)
|
|
Dimensions (W x D x H)
|
9.75 x 10.25 x 5.2 in. (24.77 x 26.04 x 13.2 cm)
|
|
Weight
|
11.5 lb. (5.2 kg)
|
|
Electrical Requirements
|
120V, 1.8A, 215W
|
- Confirm stability and accuracy of power supply and PCB voltage outputs
- Inspect display integrity, ensuring pixel clarity and replacing any degraded or non-functional elements
- Verify complete functionality and responsiveness of all control buttons, switches, and knobs
- Conduct thorough inspection of internal wiring and all electrical connections for continuity; replace or secure any degraded or substandard components
- Examine block holder platform for alignment, obstructions, or error-inducing irregularities
- Perform detailed inspection of motor bearings, assessing for wear or misalignment, and replace if performance deviates from specifications
- Calibrate rotational speed precisely using a NIST-traceable tachometer for compliance with operational standards
- Calibrate temperature accuracy using a NIST-traceable temperature probe, validating readings across the operational range
- Ensure timer precision by validating functionality and consistency against set parameters
- Conduct a comprehensive cosmetic inspection, verifying all surfaces and external components meet quality standards
Technician Inspection and Recertification Checklist: Thermo Mixer
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Confirm stability and accuracy of power supply and PCB voltage outputs
|
Completed
|
|
|
Inspect display integrity, ensuring pixel clarity and replacing any degraded elements
|
Completed
|
|
|
Verify functionality and responsiveness of all control buttons, switches, and knobs
|
Completed
|
|
|
Inspect internal wiring and connections for continuity, replacing or securing degraded components
|
Completed
|
|
|
Examine block holder platform for alignment, obstructions, or irregularities
|
Completed
|
|
|
Inspect motor bearings for wear or misalignment, replacing if necessary
|
Completed
|
|
|
Calibrate rotational speed using an NIST-traceable tachometer
|
Completed
|
|
|
Calibrate temperature with an NIST-traceable probe, validating accuracy
|
Completed
|
|
|
Ensure timer precision by validating against set parameters
|
Completed
|
|
|
Conduct cosmetic inspection for quality standard compliance
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
