 |
Eppendorf 5425R Refrigerated Centrifuge w/ Keypad
Maximum Capacity
24 x 1.5/2.0 ml
10 x 5.0 ml
Temperature Range
Ambient -10C to +40C
- Advanced cooling system maintains precise temperatures, even during high-speed operation
- Whisper-quiet operation for a comfortable and distraction-free lab environment
- Fast pre-cooling function brings the rotor chamber to the desired temperature quickly
- Supports a variety of rotors to accommodate various tube types, including PCR strips, spin columns, and cryogenic tubes
- Intuitive digital controls for easy parameter setup and monitoring
- Rapid acceleration and deceleration times for efficient sample processing
- Compact and lightweight design optimizes bench space and simplifies placement
- User friendly keypad simplifies program generation for consistent protocols
The Eppendorf 5425R Refrigerated Centrifuge w/ Keypad is a whisper-quiet microcentrifuge designed for a wide range of molecular and cell biology applications. Featuring an advanced cooling system, it provides precise temperature control, ensuring reliable cooling at 4C even at maximum rotor speed. The fast pre-cooling function reduces wait times, bringing the rotor chamber from 21C to 4C in just 8 minutes. With a broad speed range from 100 RPM to 15,060 RPM, the 5425R is highly versatile, accommodating diverse workflows. This centrifuge supports a comprehensive range of six rotors, expanding its compatibility with various sample types, such as micro test tubes, PCR strips, and spin columns. The included FA-24x2 Fixed Angle Rotor achieves the maximum speed of 15,060 RPM, delivering consistent and efficient performance. Compact, user-friendly, and reliable, the 5425R is an indispensable tool for temperature-sensitive sample processing.
The included FA-24x2 Fixed Angle Rotor reaches a maximum speed of 15,060 RPM. All of our equipment is fully tested to perform at factory specifications before being shipped.
The Eppendorf 5425R Refrigerated Centrifuge w/ Keypad includes:
- > FA-24x2 Fixed Angle Rotor with Aerosol Lid
- > NIST Centrifuge Calibration and Preventative Maintenance Report
- > Operator's Manual
- > Rotor Wrench
- > Power Cord
- > Full 180 Day Parts and Labor Warranty
Eppendorf 5425R Refrigerated Centrifuge w/ Keypad Specifications
|
Maximum Speed
|
15,060 rpm
|
|
Maximum RCF
|
21,300 x g
|
|
Maximum Capacity
|
24 x 1.5/2.0 ml
10 x 5.0 ml
|
|
Temperature Range
|
Amtbient -10°C to +40°C
|
|
Timer
|
10 seconds to 9:59 hours, with continuous run
|
|
Acceleration Time
|
15 seconds
|
|
Deceleration Time
|
15 seconds
|
|
Dimensions (W x D x H)
|
11.42 x 18.9 x 10.24 in (29 x 48 x 26 cm)
|
|
Weight
|
46.3 lb. (21 kg)
|
|
Electrical Requirements
|
120V, 50/60Hz, 3.2A, 360W
|
- Confirm the power supply output voltages match specified requirements for stable distribution to all internal components
- Measure and verify voltages at PCB test points to ensure accurate power delivery and circuit integrity
- Confirm rotor compatibility with the centrifuge model and check that rotor detection systems recognize the rotor type
- Inspect the exterior for any cosmetic or structural damage that could affect performance or safety
- Check the door mechanism alignment to ensure secure and smooth opening and closing
- Inspect and replace the gas strut with an OEM part to maintain proper door support and safety
- Examine the rotor chamber bowl for dents or damage and replace as needed to ensure safe operation
- Replace and confirm full functionality of all lid lock switches to maintain secure closure
- Inspect and lubricate the door lock mechanism, applying grease to the lid lock rail for smooth operation
- Test compressor functionality (if applicable) to ensure proper operation and consistent temperature control
- Conduct an 8-12 hour cycle test to validate consistent performance over prolonged use
- Confirm rotor motor stability, check for unusual noise, and assess mechanical integrity during operation
- Inspect the condensation drain and clear any clogs to prevent moisture buildup in the rotor chamber
- Verify RPM accuracy using an NIST-traceable tachometer and perform calibration as necessary
- Check the centrifuge error log to ensure zero recorded issues, confirming system reliability
Technician Inspection and Recertification Checklist: Centrifuges
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
| Task |
Completed? |
Remarks? |
| Confirm power supply output voltages match specified requirements |
Completed |
|
| Measure and verify voltages at PCB test points for accuracy |
Completed |
|
| Confirm rotor compatibility and detection for proper identification |
Completed |
|
| Inspect exterior for cosmetic or structural damage |
Completed |
|
| Check door mechanism alignment for secure opening and closing |
Completed |
|
| Inspect and replace gas strut with OEM part as needed |
Completed |
|
| Examine rotor chamber for dents or damage and replace if necessary |
Completed |
|
| Replace and confirm functionality of all lid lock switches |
Completed |
|
| Lubricate door lock mechanism and lid lock rail for smooth operation |
Completed |
|
| Test compressor (if applicable) for proper operation and cooling |
Completed |
|
| Run 8-12 hour cycle test to ensure consistent performance |
Completed |
|
| Check rotor motor for stability, noise, and integrity |
Completed |
|
| Inspect and clear condensation drain to prevent buildup |
Completed |
|
| Verify RPM accuracy with NIST traceable tachometer and calibrate |
Completed |
|
| Check centrifuge error log for zero recorded issues |
Completed |
|
To View More of Our Recertification Protocol Click Here
|
|
|
