Setable Flow Range
0.001 – 10 ml/min, in 0.001 ml/min increments
Flow Range
0.2 – 10.0 ml/min
Flow Precision
£ 0.07% RSD, or £ 0.02 min SD whatever is greater, based on retention time at constant room temperature
Flow Accuracy
± 1% or 10 µl/min whatever is greater
Pressure
Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5880 psi) up to 5 ml/min
Operating range 0 – 20 MPa (0 – 200 bar, 0 – 2950 psi) up to 10 ml/min
Pressure Pulsation
< 2% amplitude (typically < 1%), at 1 ml/min isopropanol, at all pressures > 1 MPa (10 bar)
Recommended pH Range
1.0 – 12.5, solvents with pH > 2.3 should not contain acids which attack stainless steel
Gradient Formation
Low pressure quaternary mixing/gradient capability using proprietary high-speed proportioning valve
Delay volume 800 – 1100 µl, dependent on back pressure
Composition Range
0 – 95% or 5 – 100%, user selectable
Composition Precision
< 0.2% SD, at 0.2 and 1 ml/min
Dimensions (H x W x D)
5.5 x 13.5 x 17 in
Electrical Requirements
100-120 or 22-240 VAC, 50/60 Hz, 220 VA
Maximum Flow Rate
0-5 ml/min per channel
5-10 ml/min at reduced degassing performance
Ambient Operating Temperature
0° to 55°C
Ambient Non-operating Temperature
-40° to 70°C
Power Consumption
30 W
Line Voltage
100-120 220-240 VAC
Line Frequency
50 r 60 Hz
Weight
7kg (15.4 lbs)
Dimensions (W x D x H)
13.5 x 17 x 3.1 in
< 0.3% RSD (usually 0.15%), based on retention time, at 1 ml/min
Temperature Range
10° below ambient to 80° C
Temperature Stability
± 0.15°C
Temperature Accuracy
± 0.8°C
Column Capacity
Three 30cm columns
Warm-up/Cool Down
5 mins from ambient to 40°C
Dead Volume
3 ul left heat exchanger6 ul right heat exchanger
5.5 x 16 x 17 in (14 x 41 x 43.5 cm)
