 |
 |
 |
 |
Buchi R-210 Rotavapor System
The Buchi R-210 Rotavapor System includes the
Buchi B-491 Heating Bath, "C” glassware attachments, Buchi V-700 vacuum pump, and V-850 vacuum controller. The Buchi R-210 is compact, easy-to-use, reliable, and
safe, while also providing a complete solution for laboratory solvent
evaporation through an integrated singular vacuum controller, vacuum pump, and
recirculating chiller design.
The V-850 vacuum controller offers pressure regulation to a
setpoint, a library containing 43 commonly-used solvents (with the ability to
add more), a timer function, USB interface for data transfer, and control of quick-action
jack and Rotavapor rotation.
The B-491 heating bath has a capacity of 4L and a temperature
range of 20° to 180°C. The
B-491 has a large display with actual and setpoint
temperatures and has quick heating capabilities.
The Buchi Rotavap System can be used for a multitude of
applications from distilling solutions, to medical marijuana sample extraction.
All of our equipment is fully tested to perform at factory
specifications before being shipped.
The Buchi R-210 Rotavapor System includes:
- > V-700 Vacuum Pump
- > B-491 Heating Bath
- > V-850 Vacuum Controller
- > "C" Glassware with Dry Ice Trap
- > 1 Liter Receiving Flask
- > 1 Liter Evaporating Flask
- > All necessary tubing, wires, connectors, power cords, etc.
- > Full 180 Day Parts and Labor Warranty
Buchi R-210 Rotavapor System Specifications
Buchi R-210 Rotavapor System
|
Flask Size
|
50 to 4000 mL
|
Dimensions (L x W x H)
|
21.6 x 21.6 x 22.6 in ( 55 x 55 x 57.5 cm)
|
Maximum Flask Capacity
|
6.6 lbs (3 kg)
|
Rotation Speed
|
20 to 280 rpm
|
Temperature Range
|
20° to 180°C
|
Electrical
|
100-120V, 50/60Hz, 60W
|
Buchi V-850 Vacuum Controller
|
Measurement Range
|
1400 – 0 mbar
|
Control Range
|
1100 – 0 mbar
|
Measuring Principle
|
Capacitive, independent of gas type, absolute pressure gauge / sensor
made from aluminum oxide-ceramic
|
Measuring Accuracy
|
±2 mbar (± 1 digit) - after calibration at constant temperature
|
Vacuum Concentration
|
GL 14
|
Temperature Compensation
|
0.07 mbar/K
|
Hysteresis
|
Automatic or 1 – 500 mbar
|
B-491 Heating Bath
|
Display
|
LCD Digital Display
|
Control
|
Analog Control Knobs
|
Temperature range
|
20 to 180°C
|
Temperature Accuracy
|
+ 1ºC
|
V-700 Vacuum Pump
|
Capacity
|
1.8 m3 /h*
|
Number of steps (heads)
|
2 (2)
|
Final Vacuum ( Absolute)
|
<10mbar
|
Final vacuum with gas ballast
|
24mbar
|
Connection
|
GL14
|
Power Consumption
|
210 watts
|
Electrical requirements
|
100-240V 50/60Hz
|
Pump moter
|
DC brushless
|
Nominal speed
|
Max. 1600 min -1
|
Sound Level
|
40—52dbA
|
Buchi R 210 Manual
Click Here to View all the Technical Specs for the R-210
Buchi 210 Rotavapor System
Our technicians decontaminate and clean equipment upon arrival at our facility and upon your purchase to create a neutral environment for your labs use.
Preliminary testing is then conducted on our equipment to identify potential defects. Upon completion, we replace all faulty and/or under-performing parts with original manufacturer parts that perform up to specification.
Any parts known to fail or malfunction on the piece of equipment are removed and replaced to insure the extended lifetime of your equipment.
Any necessary preventative maintenance is performed alongside repairs, so your purchase will be ready to go as soon as it arrives.
All of the electronics and boards are tested for proper function and response by our industry trained technicians. Any electronic deficiencies detected are immediately repaired.
Final testing cycles ensure your equipment performs fully at manufacturer specifications, guaranteeing you receive a properly working product ready for use.
Once we finish our rigorous testing and decontamination procedures, your order will be packaged to best protect it during shipment and will include delivery insurance.
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Every product we offer undergoes a rigorous inspection process to verify that all manufacturer specifications are met. All of the electronics and boards are tested for proper function, and any necessary preventative maintenance is performed alongside repairs by our industry trained technicians. Our primary goal is to offer products that are as close to new as possible at an affordable price.
All Lab Equipment is Fully Recertified and Tested
Most Pieces Ship within 2 to 5 Business Days
All Products Come with a Standard Warranty
Trained Customer and Technical Support
Industry Leading Overall Customer Satisfaction
We love shopping at Marshall Scientific! Great products, prices, and performance. Marshall Scientific provides 'tried and true' equipment at a fraction of original purchase price. I always shop here first!
Meg W. / Stanford University
Easy to find what you need with clear specs, website ordering was simple, equipment arrived quickly, very well packaged and working as expected! I couldn't ask for more, I'll definitely use them again!
A. Bradley / Honeywell
They do a very high quality job worth every penny they charge. Customer service is fantastic, they can always be reached by phone or email, and the staff are very knowledgeable and ready to help.
Igor P. / University of Maryland
Click Here to View Our Other Testimonials
|
|
 |
 |
 |
 |

|