Home > Microplate Readers >

Biotek Synergy 2 SL Multi-Mode Microplate Reader
Biotek Synergy 2 SL Multi-Mode Microplate Reader
Click Here to View the Technical Specs for the Synergy 2 SL
 
Alternative Views:


Our Price: $7,275.00

Condition: Fully Refurbished and Tested to Perform at Manufacturer Specifications
Warranty: 90-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 4 to 8 Business Days

Request a Formal Quote


Quantity in Stock:1
Product Code: B-S2SL

Additional Product Accessories

Optional Upgrades:
Free Upgrade to Preloaded Desktop PC w/ 24" Monitor - ($500 Value)

Qty:
Description
Refurbishment Protocol
Technical Specification Sheet (NEW)
 

Biotek Synergy 2 SL Multi-Mode Microplate Reader

The Biotek Synergy 2 SL is a single-channel microplate reader for research and development and in vitro diagnostic use and includes incubation control, shaking, Gen5 software and Luminescence capability. Synergy 2 uses a unique combination of monochromator, filters and dichroic mirrors. Its three broad-spectrum light sources have been chosen for optimal illumination and excitation in all applications. The reader is computer-controlled using BioTek’s Gen5 PC software for all operations including data reduction and analysis. The Synergy 2 is robot accessible and compatible with BioTek’s BioStack Microplate Stacker. Gen5 supports OLE automation to facilitate the Synergy 2’s integration into an automated system. Luminescence is measured by the low-noise PMT detector through an empty filter position in the Emission filter wheel. Filters can also be used if light filtering is necessary. The Synergy 2 SL has a 4-Zone temperature control from 4°C over ambient to 50°C. Internal plate shaking is supported to ensure that reagents are properly mixed prior to reading.

Included with the Biotek Synergy 2 SL Multi-Mode Microplate Reader:
Includes:
> Windows 10 Data Station with Pre-Loaded Gen5 PC Software
> Operator's Manual
> Interface Cable
> Full 90 Day Part and Labor Warranty

Biotek Synergy 2 SL Multi-Mode Microplate Reader Specifications

Microplate Capacity

Standard 6-, 12-, 24-, 48-, 96-, 384-well microplates

Max Plate Height:

Luminescence modes: plates up to 1.25” (31.75 mm) high

Dimensions (D x W x H)

17.5 x 15 x 17.5 in

44.5 cm x 38.5 cm x 44.5 cm

Weight

57lbs (25.8 kg)

Environment

Operational temperature 18º to 40°C

Humidity

10% to 85% relative humidity (non-condensing)

Power Supply

24-volt external power supply compatible with

100-240 V~; +10% @50-60 Hz

Power Consumption

250W maximum

Incubation

Temperature control range from 4º over ambient to 50ºC.

Temperature variation ± 0.50°C across the plate @ 37°C (250 µl per well with the plate sealed)

Plate Shaking

Low, Medium, High and Variable shaking speeds. Shake time is programmable by the user

Luminescence

50 amol/well flash ATP in a 96-well plate (low-noise #49984 PMT)

500 amol/well flash ATP in a 96-well plate (red-shifted #49721 PMT)

Computer Specifications

Processor

Intel I5-4300U CPU

Ram

16.0 GB

Brand

Hewlett-Packard

Hard drive

240GB Solid State Drive

Operating System

Windows 10 64-Bit


BioTek Synergy 2 SL Manual

Click Here to View all the Technical Specs for the Synergy 2 SL

Why Buy From Marshall Scientific?

Every product we offer undergoes a rigorous inspection process to verify that all manufacturer specifications are met. All of the electronics and boards are tested for proper function, and any necessary preventative maintenance is performed alongside repairs by our industry trained technicians. Our primary goal is to offer products that are as close to new as possible at an affordable price.

All Lab Equipment is Fully Refurbished and Tested

Most Pieces Ship within 2 to 5 Business Days

All Products Come with a Standard Warranty

Trained Customer and Technical Support

Industry Leading Overall Customer Satisfaction

Marshall Scientific's Certified Refurbishment Protocol

×

Our technicians decontaminate and clean all equipment upon arrival and upon purchase to create a neutral environment for lab use.

Preliminary testing is conducted to identify potential product defects, upon completion, we replace all faulty and/or under-performing parts with original manufacturer parts that perform up to specification.

Any parts known to fail or malfunction from excessive use are removed and replaced to insure the extended lifetime of your equipment.

Any necessary preventative maintenance is performed alongside repairs, so your purchase will be ready to go as soon as it arrives.

All electronics and boards are tested for proper function and response by our industry trained technicians. Any electronic deficiencies detected are immediately repaired.

Final testing cycles ensure your instrument performs fully at manufacturer specifications, guaranteeing you receive a properly working product ready for use.

Once we finish our rigorous testing and decontamination procedures, your order will be packaged to best protect it during shipment and will include delivery insurance.

Stanford University
We love shopping at Marshall Scientific! Great products, prices, and performance. Marshall Scientific provides 'tried and true' equipment at a fraction of original purchase price. I always shop here first!
Meg W. / Stanford University
Honeywell
Easy to find what you need with clear specs, website ordering was simple, equipment arrived quickly, very well packaged and working as expected! I couldn't ask for more, I'll definitely use them again!
A. Bradley / Honeywell
University of Maryland
They do a very high quality job worth every penny they charge. Customer service is fantastic, they can always be reached by phone or email, and the staff are very knowledgeable and ready to help.
Igor P. / University of Maryland
Click Here to View Our Other Testimonials →

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Microplate Readers
Spectrophotometers
Microplate Reader Capability