Home > Analyzers
Choose a sub category:
Agilent - DNA / RNA Electrophoresis Analyzers YSI - Biochemistry Analyzers


Analyzers

Sort By:
Page of 3
Agilent 2100 Bioanalyzer - model G2938A

Agilent 2100 Bioanalyzer Specifications

Analysis Run Time

30 to 45 min

Number of Samples

Up to 12 samples/chips

Sample Volume

1 µl

Sizing Range

50 to 7000 bp

Ambient Operating Temperature

5° to 40°C (41° to 104°F)

Electrical Requirements

100-240VAC, 50-60Hz

Power Consumption

60 VA

Dimensions (W x D x H)

162 x 412 x 290 mm (6.4 x 16.2 x 11.4 in)

Safety Standards: IEC, CSA, UL

Installation Category II, Pollution Degree 2

Our Price: $6,495.00
Caliper Life Sciences LabChip XT Fractionation System Caliper Life Sciences LabChip XT Fractionation System

Caliper Life Sciences LabChip XT Fractionation System Specifications

Fluorescence Detection

Detection Wavelength

Bandpass 547 to 750 nm

Data Rates

80Hz

Light Source

Warmup Time

30 seconds

Excitation/Emission Wavelengths

532 nm

Power Output

5 mW maximum continuous (CW)

General

Dimensions (H x W x D)

7.1 x 7.1 x 13 in (180 x 180 x 330 mm)

Chip Capacity

One 4-channel chip

Ventilation/Cooling

3” (77 mm) minimum space required around instrument for proper air flow

Environmental

Operating Temperature

65° to 82°F (18° to 28°C)

Operating Humidity

10% to 70% RIH, noncondensing

Storage Temperature

50° to 104°F (10° to 40°C)

Electrical

Power Input

1.0Arms max at 90Vac, 47-63Hz

0.6Arms max at 264Vac, 47-63Hz

Input Voltage

100-127/200-240V~ nominal

90-264V~ maximum operating range

Power Consumption

24VDC, 1.2A max

Assay Voltage

Minimum Voltage/Current

50V (limited by current)

Maximum Voltage/Current

600V (limited by current)

Barcode Reader

Barcode Engine

Motorola

Supported Barcode Types

2D Matrix


Our Price: $5,695.00
Beckman P/ACE MDQ Capillary Electrophoresis, UV Beckman P/ACE MDQ Capillary Electrophoresis System, UV

Beckman P/ACE MDQ Capillary Electrophoresis System


The Beckman P/ACE MDQ Capillary Electrophoresis System is configured with both a photo diode array and selectable-wavelength UV/Vis detector, UV source optics, temperature-controlled sample storage module, and 32 Karat Software configured on an desktop controller. The P/ACE MDQ system offers automated multi-format sample introduction directly from 96 well plates, 2 mL autosampler vials, PCR vials, and 0.5 mL tubes. An array of 36 buffer pairs independent from the samples allows your methods development strategies to be automated while maintaining system sample capacity. The P/ACE MDQ electrophoresis system offers multiple modes of separation, including voltage, current, power, pressure, and vacuum, allowing the programming of both step and linear gradients along with the simultaneous application of pressure or vacuum on both ends of the capillary. This system features a modular high sensitivity selectable wavelength UV detector, which utilizes up to seven filters in an assembly which allows wavelength changes during a run. Sample temperature control within the P/ACE MDQ system works to minimize the degradation of temperature-labile compounds and controlling reaction rates when looking at enzyme kinetics.

Our Price: $8,495.00
YSI 2700 Select Biochemistry Analyzer YSI 2700 Select Biochemistry Analyzer

YSI 2700 Select Biochemistry Analyzer Specifications

Aspirated sample volume

User selects 5 to 65 microliters

Analysis time

60 seconds

Precision

<2% cv=”n=10”

Wasteline tubing

Silicone: 0.16” OD x 0.10” ID

Nominal flow rate (inlet line)

100 to 2500 microliters per minute (+/-8% @ +/-6 PSI)

Sample Interval

2 minutes to 1,000 hours

Sample containers

10 to 16 mm diameter, 20 to 100 mm height/Volume: 5.1 microliters per inch

Sample wheel

19.1 dia. X 1.9 cm

Size

23.5 x 20.3 x 12.7 cm, 2.5 kg

Our Price: $6,695.00
Hewlett Packard G1600AX 3D Capillary Electrophoresis Agilent HP G1600AX 3D Capillary Electrophoresis

Agilent HP G1600AX 3D Capillary Electrophoresis


The HP G1600AX 3D Capillary Electrophoresis system includes a computer equipped with necessary software. Capillary electrophoresis (CE), with its high efficiency and resolution, rapid analysis time, plus minimal sample and solvent requirements, covers a broad range of applications in a wide variety of industries. Agilent Technologies developed this technique with the Agilent Capillary Electrophoresis system. Innovations include diode array detection in CE, the extended light-path capillaries, automated fraction collection, capillary electrochromatography (CEC), the high sensitivity detection cell, and fully integrated solutions for CE/MS. HPLC-like reproducibility, sensitivity and linearity integrated software with graphical user interface pioneering new separation techniques, including capillary electrochromatography (CEC) and capillary electrophoresis mass spectrometry (CE/MS ) extensive regulatory compliance tools.

Our Price: $8,695.00
Beckman Coulter CEQ-8000 Analyzer Beckman Coulter CEQ-8000 Analyzer

Beckman Coulter CEQ-8000 Analyzer


The Beckman Coulter CEQ-8000 Analyzer is a medium throughput, fluorescence-based system that utilizes capillary electrophoresis with up to 8 capillaries operating in parallel. This analyzer provides automated sequencing for detailed study of genome structures and rapid DNA fingerprinting for genomes by AFLP analysis. The CEQ-8000's on-column laser-induced fluorescence with auto capillary alignment ensures sensitive and reliable detection. This instrument will help you simplify your process and reduce your chance of error. The Beckman CEQ-8000 fills the capillary array with a patented linear polyacrylamide (LPA) gel, denatures and loads the sample, applies the voltage program, and analyzes the data.

Our Price: $7,995.00
Agilent CE Capillary Electrophoresis System Agilent CE G1600AX Capillary Electrophoresis System

Agilent CE G1600AX Capillary Electrophoresis System


The Agilent CE G1600AX Capillary Electrophoresis System includes a computer equipped with necessary software. Capillary electrophoresis (CE), with its high efficiency and resolution, rapid analysis time, plus minimal sample and solvent requirements, covers a broad range of applications in a wide variety of industries. Agilent Technologies developed this technique with the Agilent Capillary Electrophoresis system. Innovations include diode array detection in CE, the extended light-path capillaries, automated fraction collection, capillary electrochromatography (CEC), the high sensitivity detection cell, and fully integrated solutions for CE/MS. HPLC-like reproducibility, sensitivity and linearity integrated software with graphical user interface pioneering new separation techniques, including capillary electrochromatography (CEC) and capillary electrophoresis mass spectrometry (CE/MS ) extensive regulatory compliance tools.

Our Price: $8,195.00