 |
 |
 |
|
Benchmark BenchMixer Vortex Mixer
Speed Range
200 to 3,200 RPM
Operating Modes
Touch or continuous
- Powerful motor delivers instant vortexing
- Advanced Q-Drive dynamic balancing system ensures smooth, quiet, and stable operation
- “No-walk” suction feet and spill-proof electronic controls enhance safety and reliability
- Cold room and incubator compatible for flexible laboratory use
- Compact footprint saves bench space while offering durable performance
The BenchMixer Vortex Mixer sets a new standard in sample mixing with its powerful motor and advanced Q-Drive dynamic balancing system. Delivering smooth, instant vortexing for tubes of all sizes—including full 50ml samples—it ensures maximum mixing efficiency while minimizing noise and vibration. This combination results in quieter operation, greater stability, and longer instrument life compared to traditional mixers.
Designed for versatility, the BenchMixer offers variable speed control from 200 to 3,200 RPM with both touch and continuous operating modes to suit a wide range of protocols. Its 3mm orbit provides vigorous mixing, while “no-walk” suction feet and spill-proof electronic controls enhance safety and reliability in any lab environment. Compact enough for limited bench space, the unit is also compatible with cold room and incubator use, making it a durable and adaptable tool for everyday mixing needs. All of our equipment is fully tested to perform at factory specifications before being shipped.
Marshall Scientific is an Authorized Distributor for Benchmark products. If a brand new tube or microplate head accessory is necessary for your work, our team can assist in selecting a compatible option.
The Benchmark BenchMixer Vortex Mixer includes:
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
Benchmark BenchMixer Vortex Mixer Specifications
|
Speed
|
200 to 3,200 RPM
|
|
Operating Modes
|
Touch or continuous
|
|
Orbit
|
3mm
|
|
Operating Temp Range
|
+4°C to 45°C
|
|
Dimensions (W x D x H)
|
5 x 6.3 x 6.7 in (13 x 16 x 17 cm)
|
|
Electrical Requirements
|
115V, 60Hz, 1.5A
|
- Verify power supply and PCB output correct, stable voltages across all required circuits
- Confirm the correct platform head is installed according to specifications
- Inspect the display for dim or dead pixels, replacing any compromised sections to maintain clear visibility
- Confirm full functionality of all buttons and knobs, ensuring accurate input response
- Verify that touch, pulse, and continuous modes operate fully and as intended
- Inspect all internal wiring for breakages, tears, or wear, replacing any underperforming components to ensure reliability
- Disassemble and thoroughly clean the internal casing to remove any accumulated debris
- Check that the feet are intact and confirm the vortexer is properly balanced on a flat surface
- Conduct a comprehensive cosmetic inspection to ensure all exterior surfaces meet quality standards
Technician Inspection and Recertification Checklist: Vortexer
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Verify power supply and PCB output stable, correct voltages across circuits
|
Completed
|
|
|
Confirm correct platform head is installed according to specifications
|
Completed
|
|
|
Inspect display for dim or dead pixels; replace compromised sections for clarity
|
Completed
|
|
|
Confirm functionality of all buttons and knobs for accurate input response
|
Completed
|
|
|
Verify full operation of touch, pulse, and continuous modes as intended
|
Completed
|
|
|
Inspect internal wiring for damage; replace underperforming components for reliability
|
Completed
|
|
|
Disassemble and clean internal casing to remove accumulated debris
|
Completed
|
|
|
Check feet for integrity and confirm vortexer is balanced on flat surface
|
Completed
|
|
|
Conduct comprehensive cosmetic inspection to ensure quality of exterior surfaces
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
