Agilent 1260 Infinity II LC System w/ VWD

The Agilent 1260 Infinity II LC System w/ VWD provides a liquid chromatograph offering ultra fast and high resolution separation capability for consistently accurate results. The 1260 Infinity II LC System delivers several ease-of-use features, making it a standard system for routine analysis. With an operating pressure of up to 600 bar the 1260 Infinity II Quaternary Pump is compatible with HPLC and UHPLC, i.e. handling 2.1, 3, and 4.6 mm ID columns over the flow rate range (up to 5 mL/min) and semi preparative analysis due to flow up to 10 mL/min. The 1260 Infinity II Multisampler can handle both vials and microtiter plates with ease and efficiency, and is designed for low carryover, as you can take clean to a whole new level with the multi-wash capability, cleaning all relevant injection parts between runs. This integrated feature flushes the injection needle outside with three solvents, and uses seat back flush procedures to reduce carryover to less than 9 ppm.

The Agilent 1260 Infinity II Variable Wavelength Detector (VWD) is the most sensitive and fastest detector in its class. The detector features time-programmable wavelength switching provides sensitivity and selectivity for your applications. More sample information can be acquired in the dual wavelength mode. Low detector noise (< ± 2.5 AU) and baseline drift (< 1 x 10^-4 AU/h) facilitates precise quantification of trace levels components. High productivity can be achieved with fast analysis at up to 120 Hz data rates. The Agilent 1260 Infinity II Multicolumn Thermostat (MCT) allows precise column thermostatting over a broad temperature range: from cooling down to 10 degrees below ambient temperature up to 85°C, providing high flexibility for optimized speed and selectivity of LC separation. For bio-inert applications bio-inert heat exchangers and a selection of bio-inert valves are offered by Agilent.

The Agilent 1260 Infinity II LC System w/ VWD can be fully controlled from the Agilent OpenLab CDS Software, which allows for user-friendly operation in data acquisition, analysis, instrument control, automation, and more.

This Agilent system is in excellent condition and will be fully tested to perform at factory specifications before being shipped.

Agilent 1260 Infinity II LC System w/ VWD Specifications

VWD Detector	Specification
Detection Type	Double-beam photometer
Light Source	Deuterium lamp
Wavelength Range	190 - 600 nm
Noise	< ± 0.25 x 10^-5 AU, at 230 nm (single wavelength detection) < ± 0.80 x 10^-5 AU, at 230 nm and 254 nm (dual wavelength detection)
Drift	< 1 x 10^-4 AU/h at 230 nm
Linearity	> 2.5 AU upper limit
Wavelength Accuracy	± 1 nm, self-calibration with deuterium lines, verification with holmium oxide filter
Wavelength Precision	< ± 0.1 nm
Slit Width	6.5nm typical over whole wavelength range
Time Programmable	Wavelength, polarity, peak width, lamp on/off
Flow Cell	Standard: 14 µl volume, 10 mm cell path length and 40 bar (588 psi) pressure maximum
Spectral Tools	Stop-flow wavelength scan

Downloads