Agilent 1260 Infinity I HPLC G1367E High Performance Autosampler

The Agilent 1260 Infinity I HPLC G1367E High Performance Autosampler is designed for fast, precise, and flexible sample injection in high-throughput HPLC workflows. Supporting pressures up to 600 bar, it seamlessly integrates with modern narrow-bore columns and binary LC systems to boost productivity. With an injection range from 0.1 to 100 µL and exceptional precision even at low volumes, this autosampler enables reliable analysis across a wide range of sample types and volumes.

Engineered with a robust X-Z-theta robotic arm, high-speed injection valve, and low carryover flow-through design, the G1367E delivers high repeatability and minimal downtime. Built-in early maintenance feedback (EMF), leak detection, and advanced diagnostics enhance operational reliability. Sample capacity is highly flexible, accommodating well plates, vials, Eppendorf tubes, and microvial trays, with fast injection cycles of under 21 seconds. A needle flush station minimizes carryover, while optional thermostatted modules ensure precise vial/plate temperature control for sensitive workflows. This high-performance autosampler is ideal for demanding labs requiring efficiency, precision, and scalability.

All of our equipment is fully tested to perform at factory specifications before being shipped.

Agilent 1260 Infinity I HPLC G1367E High Performance Autosampler Specifications

Pressure	Operating range 0 - 60 MPa (0 - 600 bar, 0 - 8700 psi)
GLP Features	Early maintenance feedback (EMF), electronic records of maintenance and errors
Communications	Controller-area network (CAN), RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
Safety Features	Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display
Injection Range	0.1 – 100 µL in 0.1 µL increments (recommended 1 µl increments) Up to 40 µL with reduced injection volume kit (hardware modification required) Up to 1500 µl with multiple draw (hardware modification required)
Precision	< 0.25 % from 5 – 40 µL < 0.5 % from 2 – 5 µL < 0.7 % from 1 – 2 µL < 1.5 % from 0.5 – 1 µL
Carryover	Typically < 0.004%
Sample Viscosity Range	0.2 – 5 cp
Metering Devices	Metering pump in high pressure flow path
Sample Capacity	2 x well plates (MTP) + 10 x 2 ml vials 108 x 2 ml vials in 2 x 54 vial plate plus 10 additional 2 ml vials 30 x 6 ml vials in 2 x 15 vial plate 100 Micro vial tray 54 Eppendorf tubes (0.5/1.5/2 ml) in 2 x 27 Eppendorf tube plate
Injection Cycle Time	Typically < 21 s using default conditions and injections volume of 5 µL
Ambient Operating Temperature	4 to 55°C
Dimensions (H x W x D)	8 x 13.5 x 17 in (20 x 34.5 x 43.5 cm)
Weight	35 lb. (15.5 kg)