 |
 |
 |
|
Agilent 1200 HPLC G1365B MWD Detector
The Agilent 1200 HPLC G1365B Multiple Wavelength Detector is a dedicated MWD that offers excellent sensitivity for
both single and multiple wavelength detection. This Multiple Wavelength Detector utilizes deuterium and
tungsten lamps with a wavelength range of 190 to 950 nm, offering an expanded
detection range with lowest detection limit. The G1365B’s diode array design enables
simultaneous acquisition of up to eight compound-specific wavelengths for
increased sensitivity and selectivity. The programmable slit (1 to 16 nm) also
allows rapid optimization of sensitivity, linearity, and spectral resolution.
All of our equipment is tested to perform at factory specifications before being shipped.
The Agilent 1200 HPLC G1365B MWD Detector includes:
- > Power Cord
- > Operator's Guide
- > Full 90 Day Parts and Labor Warranty
Agilent 1200 HPLC G1365B MWD Detector Specifications
|
Detection Type
|
1024-element photodiode array
|
|
Light Source
|
Deuterium and tungsten lamps
|
|
Wavelength Range
|
190 – 950 nm
|
|
Short Term Noise (ASTM) Single and Multi-Wavelength
|
± 1 × 10^-5AU at 254 and 750 nm
|
|
Drift
|
2 × 10^-3AU/hr at 254 nm
|
|
Linear Absorbance Range
|
> 2 AU (upper limit)
|
|
Wavelength Accuracy
|
± 1 nm
|
|
Wavelength Bunching
|
1 – 400 nm
|
|
Slit Width
|
1, 2, 4, 8, 16 nm
|
|
Diode Width
|
< 1 nm
|
|
Flow Cells
|
Standard: 13 µl volume, 10 mm cell path length and 120 bar (1760 psi)
pressure maximum
Semi-Micro: 5 µl volume, 6 mm cell path length and 120 bar (1760 psi)
pressure maximum
High pressure: 1.7 µl volume, 6 mm cell path length and 400 bar (5880
psi) pressure maximum
500 nano: 0.5 µl volume, 10 mm cell path length and 50 bar (725 psi) pressure
maximum
|
|
Control and Data Evaluation
|
Agilent ChemStation for LC
|
|
Analog Outputs
|
Recorder/integrator: 100 mV or 1 V, output range 0.001 – 2 AU, two
outputs
|
|
Communications
|
Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready,
start, stop and shut-down signals, LAN optional
|
|
Safety and Maintenance
|
Extensive diagnostics, error detection and display (through control
module and ChemStation), leak detection, safe leak handling, leak output
signal for shutdown of pumping system. Low voltages in major maintenance areas.
|
|
GLP Features
|
Early maintenance feedback (EMF) for continuous tracking of
instrument usage in terms of lamp burn time with user-settable limits and
feedback messages. Electronic records of maintenance and errors. Verification
of wavelength accuracy with built-in holmium oxide filter
|
|
Housing
|
All materials recyclable.
|
Agilent 1200 HPLC G1365B MWD Detector Manual
 Click Here to View the Technical Specs for the Agilent 1200 G1365B MWD Detector
Our technicians decontaminate and clean equipment upon arrival at our facility and upon your purchase to create a neutral environment for your labs use.
Preliminary testing is then conducted on our equipment to identify potential defects. Upon completion, we replace all faulty and/or under-performing parts with original manufacturer parts that perform up to specification.
Any parts known to fail or malfunction on the piece of equipment are removed and replaced to insure the extended lifetime of your equipment.
Any necessary preventative maintenance is performed alongside repairs, so your purchase will be ready to go as soon as it arrives.
All of the electronics and boards are tested for proper function and response by our industry trained technicians. Any electronic deficiencies detected are immediately repaired.
Final testing cycles ensure your equipment performs fully at manufacturer specifications, guaranteeing you receive a properly working product ready for use.
Once we finish our rigorous testing and decontamination procedures, your order will be packaged to best protect it during shipment and will include delivery insurance.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Every product we offer undergoes a rigorous inspection process to verify that all manufacturer specifications are met. All of the electronics and boards are tested for proper function, and any necessary preventative maintenance is performed alongside repairs by our industry trained technicians. Our primary goal is to offer products that are as close to new as possible at an affordable price.
All Lab Equipment is Fully Recertified and Tested
Most Pieces Ship within 2 to 5 Business Days
All Products Come with a Standard Warranty
Trained Customer and Technical Support
Industry Leading Overall Customer Satisfaction
We love shopping at Marshall Scientific! Great products, prices, and performance. Marshall Scientific provides 'tried and true' equipment at a fraction of original purchase price. I always shop here first!
Meg W. / Stanford University
Easy to find what you need with clear specs, website ordering was simple, equipment arrived quickly, very well packaged and working as expected! I couldn't ask for more, I'll definitely use them again!
A. Bradley / Honeywell
They do a very high quality job worth every penny they charge. Customer service is fantastic, they can always be reached by phone or email, and the staff are very knowledgeable and ready to help.
Igor P. / University of Maryland
Click Here to View Our Other Testimonials
|
|
|
|
|
|
|
