 |
 |
 |
 |
Agilent 1100 HPLC G1362A Refractive Index Detector
The Agilent 1100 G1362A Refractive Index Detector is designed for optical performance, GLP compliance, and easy maintenance. With advanced temperature controlled detector optics, the G1362A is ready to use within two hours of installation. This RID features uninterrupted operation from automatic solvent recycling and auto purge, along with integrated diagnostics for efficient troubleshooting. With built-in refractive index calibration and automatic light intensity control circuit, this RID ensures optimum performance. Easy access and maintenance to valves and capillaries through front. The G1362A acts as a universal detector, especially useful for substances that do not absorb visible light, such as lipids, polymers, and carbohydrates. The Agilent G1362A RID is in excellent condition and fully tested to perform at factory specifications before being shipped.
The Agilent 1100 HPLC G1362A RID Detector includes:
- > Detector Calibration Report
- > Power Cord
- > Operator's Guide
- > Full 180 Day Parts and Labor Warranty
Agilent 1100 HPLC G1362A RID Specifications
Detection type
|
Refractive index
|
Refractive index range
|
1.00 - 1.75 RIU, calibrated
|
Measurement range
|
±600 x 10-6 RIU
|
Optical zeroing
|
via set screw
|
Optics temperature control
|
Ambient +5° to 55°C
|
Sample Cell
|
volume 8uL; maximum pressure
5 bar (0.5Mpa); maximum flow rate 5mL/minute
|
Valves
|
Automatic purge and automatic solvent recycle
|
Volumes
|
Inlet port to sample cell 62ul, inlet port to outlet port 590ul
|
Liquid contact materials
|
316 stainless steal, teflon and quartz glass
|
pH range
|
2.3 - 9.5
|
Performance specifications
|
Short term noise < ±2.5 x 10-9 RIU
Drift < 200 x 10-9 RIU/hour
|
Time programmable parameters
|
polarity, peakwidth
|
Detector zero
|
automatic zero before analysis
|
Control and data evaluation
|
Parameter entry, signal display, on-line help and diagnostics
with the Agilent 1100 Series Control Module. Optional PCMCIA card for method, sequence and logbook storage and transfer. Agilent ChemStation for LC PC based software for control and data evaluation.
|
Analog outputs
|
Recorder/integrator: 100 mV or
1 V, output range selectable, one output
|
Communications
|
Controller-area network (CAN), GPIB, RS-232C, LAN, APG
Remote: ready, start, stop and shut-down signals
|
Safety and maintenance
|
Extensive diagnostics, error detection and display (through
control module and ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas.
|
GLP features
|
Early Maintenance Feedback (EMF) for continuous tracking
of instrument usage with user-selectable limits and feedback messages. Electronic records of maintenance and errors. Automated operational qualification/performance verification (OQ/PV).
|
Housing
|
All materials recyclable
|
HP Agilent 1100 RID Manual Click Here to View all the Technical Specs for the G1362A
Our technicians decontaminate and clean equipment upon arrival at our facility and upon your purchase to create a neutral environment for your labs use.
Preliminary testing is then conducted on our equipment to identify potential defects. Upon completion, we replace all faulty and/or under-performing parts with original manufacturer parts that perform up to specification.
Any parts known to fail or malfunction on the piece of equipment are removed and replaced to insure the extended lifetime of your equipment.
Any necessary preventative maintenance is performed alongside repairs, so your purchase will be ready to go as soon as it arrives.
All of the electronics and boards are tested for proper function and response by our industry trained technicians. Any electronic deficiencies detected are immediately repaired.
Final testing cycles ensure your equipment performs fully at manufacturer specifications, guaranteeing you receive a properly working product ready for use.
Once we finish our rigorous testing and decontamination procedures, your order will be packaged to best protect it during shipment and will include delivery insurance.
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Every product we offer undergoes a rigorous inspection process to verify that all manufacturer specifications are met. All of the electronics and boards are tested for proper function, and any necessary preventative maintenance is performed alongside repairs by our industry trained technicians. Our primary goal is to offer products that are as close to new as possible at an affordable price.
All Lab Equipment is Fully Recertified and Tested
Most Pieces Ship within 2 to 5 Business Days
All Products Come with a Standard Warranty
Trained Customer and Technical Support
Industry Leading Overall Customer Satisfaction
We love shopping at Marshall Scientific! Great products, prices, and performance. Marshall Scientific provides 'tried and true' equipment at a fraction of original purchase price. I always shop here first!
Meg W. / Stanford University
Easy to find what you need with clear specs, website ordering was simple, equipment arrived quickly, very well packaged and working as expected! I couldn't ask for more, I'll definitely use them again!
A. Bradley / Honeywell
They do a very high quality job worth every penny they charge. Customer service is fantastic, they can always be reached by phone or email, and the staff are very knowledgeable and ready to help.
Igor P. / University of Maryland
Click Here to View Our Other Testimonials
|
|
 |
 |
 |
 |

|