Agilent 1260 Infinity HPLC G1329B Autosampler

The Agilent 1260 Infinity HPLC G1329B Autosampler is designed to offer the well-established flow-through design with variable volume injection and to achieve extremely low carryover, providing increased analysis speed with sensitivity, resolution, and precision. This autosampler features a sample capacity of up to 100 samples. The 1260 Infinity G1329B Autosampler is designed for use with other modules of the Agilent 1200 Infinity Series, 1200 Series, or 1100 Series LC, or with other LC systems if adequate remote control inputs and outputs are available. The autosampler is controlled by the Agilent Instant Pilot or by Agilent control software

The G1329B's transport mechanism uses an X-Z-Theta movement to optimize vial pick-up and return. A gripper arm picks up the vials and positions them below the sampling unit. Movement is also monitored by optical sensors and optical encoders to ensure correct operation. The metering device is always flushed after injection to ensure minimum carry-over. The standard analytical head of the metering device provides injection volumes from 0.1 to 100 µl, and can be operated up to 600 bar. For applications that require temperature control, this module can be paired with the Agilent 1290 Infinity Thermostat (G1330B).

All of our equipment is fully tested to perform at factory specifications before being shipped.

Agilent 1260 Infinity HPLC G1329B Autosampler Specifications

Pressure	Operating range 0 - 60 MPa (0 - 600 bar, 0 - 8850 psi)
GLP Features	Early maintenance feedback (EMF), electronic records of maintenance and errors
Communications	Controller-area network (CAN), RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
Safety Features	Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display
Injection Range	0.1 – 100 µl in 0.1 µl increments (recommended 1 µl increments) Up to 1500 µl with multiple draw (hardware modification required)
Replicate Injections	1 – 99 from one vial
Precision	Typically < 0.25 % RSD of peak areas from 5 to 100 µl Typically < 1 % RSD of peak areas from 1 to 5 µl
Minimum Sample Volume	1 µl from 5 µl sample in 100 µl microvial, or 1 µl from 10 µl sample in 300 µl microvial
Carryover	Typically < 0.1 %, < 0.05 % with external needle cleaning
Sample Viscosity Range	0.2 – 50 cp
Metering Devices	Metering pump in high pressure flow path
Sample Capacity	100 × 2 ml vials in 1 tray 40 × 2 ml vials in ½ tray 15 × 6 ml vials in ½ tray (Agilent vials only)
Injection Cycle Time	50 seconds for draw speed 200 µl/min, ejection speed 200 µl/min, injection volume 5 µl
Ambient Operating Temperature	0 to 55°C
Dimensions (H x W x D)	8 x 13.5 x 17 in (20 x 34.5 x 43.5 cm)
Weight	32 lb. (14.2 kg)