Home > Electrophoresis >

Beckman Coulter ProteomeLab PA 800 System with LIF
Beckman Coulter ProteomeLab PA 800 System with LIF
 
Alternative Views:


Our Price: $13,830.00

Marshall Scientific Repeat Customer Rewards.
You'll earn 140 points towards a future purchase.

Condition: Refurbished and Tested to Manufacturer Spec
Warranty: 90-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 5 to 7 Business Days



Quantity in Stock:1
Product Code: BCP800LIF
Qty:

Description Operator's Guide Marshall Scientific FAQ's
 

Beckman Coulter ProteomeLab PA 800 System with LIF


The Beckman Coulter ProteomeLab PA 800 System with LIF resolves and quantifies proteins by their isoelectric point and molecular weight, generates high-resolution peptide maps and carbohydrate profiles, and provides front-end separation to mass spectrometry. Beckman Coulter's expertise in capillary electrophoresis and automation technologies ensures comprehensive in-solution protein characterization for optimal proteomics discovery in the ProtemoeLab PA 800. This system employs the proteomic process of identification, isolation, fractionation, characterization, evaluation, and diagnosis for the best possible results within your research. The LIF option utilizes a 488 nm air-cooled Argon Ion Laser for measuring and recording fluorescence.

The PA 800 allows identification via flow cytometry, automated fuorescence microscopy, microarray technology, and cell viability analysis; isolation via general purpose and high performance centrifugation, ultracentrifugation, centrifugal elutriation, and automated liquid handling; fractionation via high performance centrifugation, ultracentrifugation, and liquid chromatography; characterization via capillary electrophoresis/mass spectrometry, spectrophotometry, protein characterization in solution, and automated protein crystallization; evaluation via microarray technology and software solutions; and diagnosis via automated immunoassay, flow cytometry, electrophoresis, immunochemistry, and immunofixation.

The ProteomeLab PA 800 can be used for most proteomic processes, including cellular isolation, protein fractionation, subcellular fractionation, protein characterization, antigen identification, data evaluation, and disease diagnosis.

All of our equipment is fully tested to perform at factory specifications before being shipped.

Includes: > Data Station with Preloaded Software > Calibration Report > Power Cord > Full 90 Day Parts and Labor Warranty

Beckman Coulter ProteomeLab PA 800 System with LIF Specifications

Sampling Formats

96-well plates, microfuge tubes, PCR vials, 2ml vials

Temperature Range

20° below Ambient to 60°C (minimum setting 4°C)

Temperature Stability

±1°C

Temperature Accuracy

Temperature of environment: ±2°C within the range of ±15°C from ambient; ±3°C outside the range of ±15°C for ambient.

Relative Fluorescence Units Range

0 to 1000 RFU

Dynamic Range (at a dynamic range setting of 1000)

> 10^4

Sensitivity

1 x 10^-11M Sodium Fluorescein with a signal-to noise ratio ≥ 2

Baseline Noise

< 0.005 RFU peak to peak

Baseline Drift

< 0.2 RFU per hour

Filters (optional)

For user supplied lasers: Each laser configuration requires two filters, a laser filter to block stray laser light and an emission filter to select the wavelength of the emitted light. These filters must have an outside diameter of 0.500” (+.000, -.010”) and a thickness not greater than 0.350”; if multiple filters are used in a single channel, the total thickness cannot exceed 0.350”.

Fiber Cable Length

6 ft (1.83 m)

Software Requirements

32 Karat Software, Version 7.0 or later

Laser

3 mW 488 nm (air-cooled) Argon Ion Laser

Analog Outputs

Output 1 is Data Channel 1 and Output 2 is Data Channel 2; Full scale output is 1.0 AU/V (software selectable multipliers of 1.0, 0.5, 0.2, 0.05, 0.02 and 0.01 providing lower AU/V values)

Output 3 is Current signal when Voltage is programmed; Voltage signal when either Current or Power is programmed

Electrical Requirements

100-240V, 50/60Hz; auto-voltage sensing power supply

Max Heat Dissipation to Room

400 W (1024 BTU/H)

Ambient Operation Temperature

15° to 40°C

Dimensions (W x H x D)

22.38 x 27.13 x 24.13 in (56.83 x 68.9 x 61.28 cm)

Laser Module Dimensions (W x H x D)

10.25 x 25 x 14.25 in (26.3 x 63.3 x 35 cm)


Why Buy From Marshall Scientific?

With over 3,500 university, research, and hospital labs served, Marshall Scientific boasts a 99.8% customer satisfaction rate with less than 1% instrument failure in the field.

Our A+ Better Business Bureau rating confirms our business integrity. Marshall Scientific promises to be transparent, honest, and responsive throughout the purchase process.

By outfitting your lab with Marshall Scientific, you can save up to 70% with our refurbished instrument inventory - all guaranteed to work and under our full parts and labor warranty.

Marshall Scientific is not an equipment broker or an auction company. All of our products are evaluated and refurbished by our trained technicians.

Unlike other used or refurbished sellers, Marshall Scientific offers completely transparent product stock and pricing. You can easily see what we have and how much it costs.

All of Marshall Scientific’s products are carefully packaged, crated, and insured to protect your equipment and will be ready for immediate use in your lab.

Rest assured, our devoted technical and customer service team is with you before, during, and after your purchase to insure everything works the way it should.

Full 90-Day Parts & Labor Protection

Marshall Scientific's Refurbishment Protocol

×

Our technicians decontaminate and clean all equipment upon arrival and upon purchase to create a neutral environment for lab use.

Preliminary testing is conducted to identify potential product defects. Upon completion, we replace all faulty and/or under-performing parts with original manufacturer parts that perform up to specification.

Any parts known to fail or malfunction from excessive use are removed and replaced to insure the extended lifetime of your equipment.

Any necessary preventative maintenance is performed alongside repairs, so your purchase will be ready to go as soon as it arrives.

All electronics and boards are tested for proper function and response by our industry trained technicians. Any electronic deficiencies detected are immediately repaired.

Final testing cycles ensure your instrument performs fully at manufacturer specifications, guaranteeing you receive a properly working product ready for use.


Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Electrophoresis
Analyzers > Electrophoresis Analyzers
Analyzers