Home > Chromatography - HPLC >

Agilent 1100 HPLC G1364C Fraction Collector
Agilent 1100 HPLC G1364C Fraction Collector
 
 



Our Price: $5,845.00
Sale Price: $4,815.00
Money Saved: $1,030.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 180-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 1 to 2 Business Days
Included Documentation: Delay Volume Detection and Lab Advisor Report

Request a Formal Quote


Quantity in Stock:




Product Code: AG-FCOL
Qty:

Description
Recertification Protocol
Technical Specification Sheet
 

Agilent 1100 HPLC G1364C Fraction Collector


The Agilent 1100 HPLC G1364C Fraction Collector is designed for optimized fraction collection capability without compromises. Users can choose between three dedicated fraction collectors depending on sample amount, flow rate, and the types of collection containers.

All of our equipment is fully tested to perform at factory specifications before being shipped.

INCLUDED:
The Agilent 1100 HPLC G1364C Fraction Collector includes:
  • > Firmware Version A.06.54 (Can be changed upon request)
  • > Tray
  • > Lab Advisor Diagnostic Report
  • > Lan Cable / Power Cord
  • > Operator's Manual
  • > Full 180 Day Parts and Labor Warranty

Agilent 1100 HPLC G1364C Fraction Collector Specifications

Trigger Modes

Time slices, Peak (threshold, up- /downslope), Timetable (combination of time intervals and peak) and Manual trigger (supported only with G1323BControl Module)

Operating Modes

Discrete fractions: default mode for all vessels. The flow is diverted to waste, while moving from one vessel position to the next vessel position Continuous flow: optional, available only when using well plates. It is possible to move from one well plate position to the next one without diverting the flow into the well plate to waste

Test Tube/Plate Sizes

Minimum 48 mm to 75 mm maximum

Maximum Tube Volume

ca. 45 ml

Maximum Flow Rate

100 ml / min (depending on viscosity and generated back pressure, max. 6 bar at the diverter valve)

Delay Volumes [μl]

Fraction collector inlet to diverter valve: -500 (typical, depends on length of the tubing)

Diverter valve: ~15

Diverter valve to needle: ~110

Needle: -~5

Delay Calibration Sensor

Single wavelength absorbance detector working at 654 nm, consisting of a LED and a photo diode

Diverter Valve

3/2 Diverter valve with low internal volume (15 μl), switching time < 100 ms, maximum operating pressure 6 bar

Maximum Capacity

3 fraction collectors in parallel plus one recovery fraction collector connected via 12-Position, 13-Port Selector valve

Interfaces

Controller-area network (CAN). optional; LAN or external contacts interface RS232C, APG-remote (for remote start / stop signals to / from other modules) Interface to G1330A Thermostat CAN-DC-out for operation of Agilent approved external devices like valves

Safety Features

Leak detection and safe leak handling, error detection and display, exhaust fan for fume extraction of hazardous vapors



Agilent 1100 G1364C Manual

Click Here to View all the Technical Specs for the G1364C Fraction Collector

Why Buy From Marshall Scientific?

Every product we offer undergoes a rigorous inspection process to verify that all manufacturer specifications are met. All of the electronics and boards are tested for proper function, and any necessary preventative maintenance is performed alongside repairs by our industry trained technicians. Our primary goal is to offer products that are as close to new as possible at an affordable price.

All Lab Equipment is Fully Recertified and Tested

Most Pieces Ship within 1 to 3 Business Days

All Products are Fully Warrantied

Trained Customer and Technical Support

Industry Leading Overall Customer Satisfaction

Bausch + Lomb
Working with Marshall Scientific was overall an enjoyable experience. Their customer service really helped me choose the product that fit my needs, and checking out was easier than I expected. Shipping was faster than expected which was also a plus!
James M. / Bausch + Lomb
Caltech
I have purchased a few items from Marshall Scientific over the years and I have always had great experiences with both the products and the customer support. Chat feature definitely makes both communicating and navigating easier. I would recommend this company to a colleague.
Lila B. / Caltech
Sanofi
I just received the two Polyscience chillers I ordered through your ecommerce store and I couldn't be happier with my purchase. Customer service was instrumental in helping me choose the correct model. Thanks again!
Nora F. / Sanofi
Ford
Working with Marshall Scientific has been an exceptional experience. Their team assisted me in selecting the perfect recirculating chiller for my research needs. Their expertise and guidance were invaluable, and I am grateful for their support. Marshall Scientific has been vital to the success of my research endeavors.
Zara K. / Ford
AWS
Collaborating with Marshall Scientific has been a truly exceptional experience. Their fast lead time for centrifuges is unparalleled, and their commitment to quality is evident in every aspect of their service. I would highly recommend them to anyone in need of a reliable and efficient scientific equipment supplier.
Mei L. / AWS
Pfizer
I recently ordered pipettes from Marshall Scientific and was impressed with their great selection and quality. The pipettes were exactly what I needed and worked perfectly. I would definitely order from them again.
Aarav S. / Pfizer
Mayo Clinic
The chat support I received while selecting a thermal cycler was exceptional. The representative was knowledgeable, patient, and helped me choose the perfect product for my needs. I am grateful for their assistance.
Anneliese M. / Mayo Clinic
University of Pennsylvania
I recently purchased a ChemiDoc imaging system from Marshall Scientific and was impressed with the great condition it arrived in. The shipping was professional and the system has been a valuable addition to my scientific research.
Tyler S. / University of Pennsylvania
Massachusetts Institute of Technology
The New Brunswick Incubator Shaker that I ordered from Marshall Scientific has just arrived and I cannot say enough how satisfied I am with my purchase. The shaker works like it came straight from the factory and the longer warranty is definitely a plus. I highly recommend Marshall to anyone looking for a company that stands behind their products.
Xiao L. / MIT
Mass General Hospital
My recently purchased microplate reader from Marshall Scientific has been a much needed addition to my lab. The reader is easy to use and provides accurate and reliable results. I have used it for various experiments including ELISA, cell viability assays, and protein quantification. The reader has greatly improved the efficiency and accuracy of my experiments. Thanks again!
Larisa R. / MGH
Tesla
I purchased a recirculating chiller from Marshall Scientific three months ago and couldn't be happier. The Thermoflex 2500 is a great unit and has been working perfectly. I actually bought three of them and they have exceeded my expectations.
Gavril K. / Tesla
Columbia University
I recently purchased a laboratory freezer from Marshall Scientific and I am very pleased with my purchase. The freezer is of high quality and has been perfect for storing my research samples. I use it mostly for cell culture and protein storage and it seems to do the job just fine. The overall cosmetic condition of the unit is perfect.
Juan M. / Columbia University
Rivian
I would like to extend a thanks to Kyle on the other side of Marshall Scientific's chat feature to help me select the right product for my laboratory needs. Kyle was knowledgeable and helped me choose the perfect equipment for my application. The chat feature was convenient and saved me time. I would definitely use it again in the future.
Yumi S. / Rivian
Quest Diagnostics
I recently received a Vicell cell counter from Marshall Scientific and I must say, I was anxious about making such a large purchase over the internet. However, the product arrived in perfect condition and has exceeded my expectations. I use it for various applications in my lab and it has been incredibly accurate and efficient. The professional shipping was also a plus. I will definitely be purchasing from Marshall Scientific again in the future.
Ethan S. / Quest Diagnostics
Click Here to View Our Other Testimonials

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Chromatography - HPLC
Brand > Agilent
Chromatography Component
Chromatography Component > Fraction Collectors
Brand